Konica Minolta bizhub PRESS C1070P Quick Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. All in One Printer
  5. bizhub press c1070p
  6. Quick manual

Konica Minolta bizhub PRESS C1070P Quick Manual

Hide thumbs Also See for bizhub PRESS C1070P:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Quick Guide
IC-602
1
Before Gettin g St ar ted
2
L et's Make Prin ts
3
In stallin g S oftware
4
Basic Operati on s
5
Mai nt ai ni ng th e Fin ish in g Qual i ty
6
Trou bl esh ooti ng
7
Ap pend ix

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta bizhub PRESS C1070P

Summary of Contents for Konica Minolta bizhub PRESS C1070P

  • Page 1 Quick Guide Before Gettin g St ar ted L et's Make Prin ts In stallin g S oftware Basic Operati on s Mai nt ai ni ng th e Fin ish in g Qual i ty Trou bl esh ooti ng Ap pend ix IC-602...

  • Page 2: Notations And Symbols Used In This Manual

    Welcome Thank you for purchasing this machine. This Quick Guide describes basic operations, maintenance, troubleshooting for this machine. This information will be useful to enable the full capabilities of this machine and to utilize such functionality efficiently. Please keep this manual in a safe place where you can access it easily. Notations and symbols used in this manual WARNING WARNING...

  • Page 3: Intended Use

    The user's guides are intended for the following users of the system: Operator: Person who has been trained by Konica Minolta or authorized partner to operate the system for its intended use as well as manage consumables, and perform the maintenance and troubleshooting described in user's guides.

  • Page 4: Configuration And Usage Of This Guide

    Configuration and Usage of this Guide Configuration and Usage of this Guide There are two types of User's Guides for this machine: booklet manuals and User's Guide CD. When you want to learn about detailed functions or operation procedures, refer to the HTML User's Guide included in the User's Guide CD.

  • Page 5: Html User's Guide Operating Environment

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L HTML User's Guide operating environment )Supported Operating Systems/Browsers This guide describes the operation verification in the operating systems and browsers shown below. Operating system Web browser Windows Vista (Service Pack 2) Internet Explorer 9.x Windows 7 (Service Pack 1)/Windows 8 Internet Explorer 10.x Firefox 35.x...

  • Page 6: Conventions Used In This Guide

    Product name Conventions used in this guide bizhub PRESS C1070 This machine: Indicates the entire system including options and bizhub PRESS C1070P functions. bizhub PRESS C1060 The main body: Indicates the main unit that provides print functions bizhub PRO C1060L in this machine.

  • Page 7: Table Of Contents

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Make a Note about This Machine Information Checking the mounted optional devices Get to know the optional devices mounted on this machine. You can check a part of the mounted optional devices on the [MACHINE] screen of the touch panel. Select the check boxes ( ) of the installed optional devices;...

  • Page 8: Checking Network Information

    Make a Note about This Machine Information Checking network information Make a note about network information required to use functions of this machine such as printer functions and various applications. To check network information, print out the Configuration Page Print. )Printing out the Configuration Page Print From the [MACHINE] screen on the touch panel, select [Controller] - [Report Type] - [Network Setting], then press [Execute].
  • Page 9 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Contents Intended use of this machine ........... . x-i Intended use .

  • Page 10: Contents

    Contents In a Windows environment ........... 3-2 Installation .
  • Page 11 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Adjusting the Finisher and Saddle Stitcher ........5-44 Opening the screen to be adjusted.
  • Page 12 Contents Large Capacity Stacker LS-506 ..........7-22 Saddle Stitcher SD-506 .

  • Page 13: Before Getting Started

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Before Getting Started Turning the Power ON/OFF )Power supply This machine has two power switches: main power switch and sub power switch. NOTICE The main power switch is normally kept turned on. The main power switch must be turned on or off only when you start this machine for the first time or when you restart this machine.

  • Page 14: Turning The Power Off

    Turning the Power ON/OFF Tips If [Machine is warming up] is displayed on the [MACHINE] screen, it indicates that this machine is in the warm-up state. Warm-up processing takes approximately 6.5 minutes. )Turning the power off Turn off the sub power switch. The touch panel display is cleared, and the Power LED on the control panel is changed from green to red.

  • Page 15: Power-Saving Function

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Power-saving function Using the following functions can reduce the power consumption of this machine and provide greater power-saving effects. Function Description Power Save func- Auto Low Power Turns off the touch panel display to reduce the power consumption tion of this machine.
  • Page 16 Turning the Power ON/OFF Tips Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting] is the same as Utility/Counter - [User Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting], use either of the methods to configure a setting. If Power Save on the control panel is pressed for one second or more, either of Auto Low Power or Auto Shut OFF is enabled.

  • Page 17: Available Operations In This Machine

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Available Operations in this Machine Major functions of this machine )Print functions This machine can be used as a printing system by installing an optional Image Controller. You can print data on this machine via the printer driver using the application software installed on your computer. You can configure a layout or finish setting by implementing a simple action when printing data.

  • Page 18: Scan Functions

    Available Operations in this Machine )Scan functions You can send the scan data as an E-mail attachment, send it to a shared computer (SMB server), FTP server, or WebDAV server, and save it to the USB flash drive installed on this machine by mounting an optional Image controller. In addition, you can give a scan instruction from a computer on the network to import the scan data to your computer.

  • Page 19: Application Functions

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Application functions )Color management function (Color Centro) Color Centro is an application that enables efficient color management of the image controller through a computer. To successfully print in color, you can calibrate the image controller, and edit and manage profiles and replacement tables to adjust colors.

  • Page 20: Let's Make Prints

    Printing Flow Let's Make Prints This chapter describes a basic print workflow using this machine. First confirm the basic flow to print data, then add detailed settings and adjustment to meet your requirements. Reference For information about application settings of this machine and adjustment procedures, refer to the HTML User's Guide.

  • Page 21: Step 3: Configure Information Of The Paper Loaded Into A Tray In This Machine

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Step 3: Configure information of the paper loaded into a tray in this machine Specify the type, size, weight, and other values of paper. For details, refer to page 4-5. Step 4: Use the printer driver to print data Print original data through your computer.

  • Page 22: Step 5: Check The Finishing

    Printing Flow Click the [General] tab on the setting screen of the printer driver, then select the paper size of the original data in [Original Size]. Check the setting, then click [OK]. In [Paper Tray], you can select a tray to load paper to be printed into. For information about other functions of the printer driver, refer to the HTML User's Guide.

  • Page 23: Installing Software

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Installing Software Installing the Printer Driver Operating environment )In a Windows environment Item Specifications Operating System Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2 Any processor of the same or higher specifications as recommended for your oper- ating system...

  • Page 24: In A Windows Environment

    Installing the Printer Driver Reference The PPD driver is only supported in Windows. However, the PPD driver is not supported by Windows Server 2003 R2. In a Mac OS X environment, use the PS Plug-in driver. For details about the PPD driver, refer to the HTML User's Guide. In a Windows environment )Installation Start the installer from the Driver CD supplied with this machine, then install the printer driver on your computer.
  • Page 25 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Select the name of the printer to be installed, then click [Next]. If the required printer name cannot be found, click [Have Disk], then directly specify the [Setup.inf] file. Click [Finish]. If the [Windows Security] window is displayed, click [Install this driver software anyway].

  • Page 26: Default Setting

    Installing the Printer Driver )Default setting Check that optional information of this machine is configured correctly on the printer driver. If optional information of this machine is not configured correctly on the printer driver, you cannot use optional functions. If any optional function is mounted, be sure to configure a setting. Display the printer window.

  • Page 27: In A Macintosh Environment

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L In a Macintosh environment )Installation Install the printer driver on your computer from the Driver CD supplied with this machine, then add the desired printer to the computer. This guide describes how to install the PS Plug-in driver in a Mac OS X 10.8 environment and add a Bonjour-connected printer.
  • Page 28 Installing the Printer Driver When the installation has been completed, click [Close]. Then, add a Bonjour-connected printer to your computer. In the Apple Menu, select [System Preferences], then click the [Print & Scan] icon. In OS X 10.5/10.6, click the [Print & Fax]. In OS X 10.9/10.10, click the [Printer &...
  • Page 29 Specifying a printer displays the appropriate printer driver in the [Use] field. If the printer driver is not displayed correctly, select [Select Printer Software], then directly specify [KONICA MINOLTA C1070/C1060PS]. To check the printer name of this machine, select [Administrator Setting] - [Network Setting] - [NIC Setting] - [Bonjour Setting].

  • Page 30: Default Setting

    Installing the Printer Driver )Default setting Check that optional information of this machine is configured correctly on the printer driver. If optional information of this machine is not configured correctly on the printer driver, you cannot use optional functions. If any optional function is mounted, be sure to configure a setting. Select a print command of the application, then select the required printer name from [Print].

  • Page 31: Installing Applications

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Installing Applications Operating environment )Color Centro Item Specifications Operating System Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2 Intel Core2 Duo 3 GHz or higher 3 GB or more Memory...

  • Page 32: Color Centro Setup

    Installing Applications Color Centro setup )Function overview / Color management Color Centro is an application that enables efficient color management of the image controller through a computer. Color Centro supports the following seven types of functions. Function Description [Calibration] Enhances accuracy and stability of color printing. You can cre- ate data to adjust a color shade by measuring the color printing condition of this machine.

  • Page 33: Installation

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Installation Start the installer from the Color Centro CD-ROM supplied with this machine, and then install Color Centro on your computer. Before installing Color Centro, install Microsoft .NET Framework 3.5 Service Pack 1 or later on your computer. Note that Color Centro installation processing is interrupted if Microsoft .NET Framework 3.5 Service Pack 1 or later is not installed.

  • Page 34: Start

    [Administrator Setting] - [Network Setting] - [NIC Setting] The JSP setting is a setting that relates to a connection with a Java application server. Open the Start menu, and then click [All Programs] - [KONICA MINOLTA] - [Color Centro] - [KONICA MINOLTA Color Centro].

  • Page 35: Job Centro Setup

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Job Centro setup )Function overview / Job management Using Job Centro, you can remotely operate jobs saved on this machine. You can also edit jobs and pages with Job Centro. You can change the paper setting or finish setting for jobs saved on this machine, move or delete pages while viewing page thumbnails, or insert a chapter separator.

  • Page 36: Installation

    Installing Applications )Installation Start the installer from the Job Centro CD-ROM supplied with this machine, and then install Job Centro on your computer. To install, the computer's administrator privilege is required. Insert the Job Centro CD-ROM into the CD-ROM drive of the computer. If the installer does not start, double-click [AutoRun.exe] on the CD-ROM, and then proceed to Step 3.

  • Page 37: Start

    [Administrator Setting] - [Network Setting] - [NIC Setting] The JSP setting is a setting that relates to a connection with a Java application server. Open the Start menu, and then click [All Programs] - [KONICA MINOLTA] - [Job Centro 2.0] - [KONICA MINOLTA Job Centro 2.0].

  • Page 38: Basic Operations

    Loading Paper Basic Operations Loading Paper Loading paper into the main body tray The same paper loading procedure is used for Tray 1 and Tray 2. This section describes how to load paper into Tray 1. Pull out the tray to load paper into. NOTICE Be sure to pull out the tray fully until a blue label shows on the rear- left side of the tray.
  • Page 39 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Slide the rear guide plate to any position. Determine their locations based on the size indicator of the bottom plate of the tray. To fix the side guide plates at the correct locations, load an appropriate amount of paper into the tray while aligning it to the right-hand side of the tray.

  • Page 40: Loading Paper Into The Paper Feeder Unit Pf-602M

    Loading Paper Loading paper into the Paper Feeder Unit PF-602m The following describes how to load paper into an optional Paper Feeder Unit PF-602m. The same paper loading procedure is used for Tray 3 and Tray 4. Reference For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide. Pull out the tray to load paper into.

  • Page 41: Loading Paper In Post Inserter Of Folding Unit Fd-503

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Load the remaining paper into the tray, then press the rear guide plate against the paper. NOTICE Be careful not to load paper above the , mark that indicates the height limit on the side guide plate. Otherwise, a paper jam may occur.

  • Page 42: Paper Setting

    Paper Setting Paper Setting Specifying paper information for a tray Specify the required information (size, type, weight, and other values) for the paper loaded into a paper tray. If standard-size paper is loaded, its size is recognized automatically. To load custom-size paper, specify the required size.
  • Page 43 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Paper Size]. Select one of the options under [Size Setting] to fit the paper loaded into the tray.
  • Page 44 Paper Setting Specify the size. [Standard]: Recognized automatically. In [Detect Size Setting], you can select the size to be detected. There is, however, a group of sizes having subtle distinctions, so that the machine cannot distinguish in the operation of size detection. To identify these sizes as one size so that they can be judged by the machine, you can select the size to be detected in [Detect Size Setting].
  • Page 45 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L [Tab Paper]: Specify the paper size and the number of tabs. If you select [Detect Size Setting] in [Standard], press [OK]. This returns to the [Size Setting] screen. This step is not required if you select [Custom] or [Tab Paper].
  • Page 46 Paper Setting Specify other items, if necessary. Press [OK]. This returns to the [Paper Setting] screen. Press [Close]. This returns to the [MACHINE] screen. If you press [Paper Setting] on the [COPY] screen to specify the paper size, the screen returns to the [COPY] screen.

  • Page 47: Printer Driver Setting

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Printer Driver Setting Printer driver functions This section describes how to specify the color mode using the printer driver. )[Color Mode]: Select an output color Open [Color Mode] in the Printing Preferences window of the printer driver. For [Output Color], select [Auto Color], [Full Color], or [Gray Scale].

  • Page 48: [Color Mode]: 2-Color Printing

    Printer Driver Setting )[Color Mode]: 2-Color Printing To print process colors (CMYK) using Spot Colors (Special colors), open [Color Mode] in the Printing Preferences window of the printer driver, then specify the colors to be used in [2-Color Printing]. In 2-Color Printing, process colors (CMYK) can be replaced with Spot Colors (Special colors) for printing. To specify each color, enter the spot color name into the text box on the right-hand side of the selected color.

  • Page 49: [Management]: Color Configuration

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )[Management]: Color Configuration The Color Configuration refers to a collection of a profile set available for all paper types and other color setting information. You can only specify one Color Configuration at the time of printing to easily apply the color setting available for all paper types.

  • Page 50: [Management]: Manual Setting Of A Color Conversion

    Printer Driver Setting )[Management]: Manual setting of a color conversion In Manual Settings, manually configure a color conversion setting for printing, for example, specifying an RGB or CMYK color conversion profile, specifying a printer profile appropriate to the required paper type, or selecting a Tone Curve.

  • Page 51: Maintaining The Finishing Quality

    Both Sides Adjustment is automatically carried out using the scanner function of this machine. (page 5-2) (bizhub PRESS C1070P/bizhub PRESS C71hc does not support the [Scan Meas.] adjustment.) Gap Adjustment: the method used for aligning both sides with correction of the back side magnification and print position based on the front side ones (page 5-10).

  • Page 52: Making The Both Sides Adjustment For Each Tray

    NOTICE bizhub PRESS C1070P/bizhub PRESS C71hc, which is not mounted with a scanner, cannot scan the adjustment charts to perform the [Scan Meas.] adjustment. The [Scan Meas.] adjustment provides the coordination based on the average value of gap amounts, taking into account the gap in printing position between the first and last sheets which can be produced when multiple sheets are output.
  • Page 53 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Paper Setting] on the [MACHINE] screen. Select the tray with the target paper loaded, then press [Change Set]. Press [Both Sides Adj]. Check that [Scan Meas.] is displayed, then press [Output Background Sheet].
  • Page 54 Both Sides Adjustment When the [PRINT MODE] screen is displayed, press Start on the control panel. A background sheet is printed out. If you already have the background sheet available for measurement, you do not need to print out a background sheet. Proceed to Step 7. NOTICE Use paper of A3 or larger, or 11 e 17 or larger to output the background sheet.
  • Page 55 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Enter the number of adjustment charts you want to print out. You can print out 20 or more adjustment charts; however, only up to 20 adjustment charts can be scan-measured continuously. Press Start on the control panel. Adjustment charts are printed on both sides of the paper in the tray you selected in Step 2.
  • Page 56 Both Sides Adjustment Place an adjustment chart on the Original Glass. Open the ADF, then place an adjustment chart with the front side facing up (not facing the Original Glass), setting the top side flush with the far end of the glass. Place the upper-left corner of the adjustment chart approximately 2 inches (approximately 5 cm) away from the vertical size guide and horizontal size guide respectively on the Original Glass making sure that the left and top sides are parallel to the vertical size guide and horizontal size guide respectively.
  • Page 57 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Start] on the [Scan Adjustment Chart] screen. The adjustment chart is scanned. When scanning is properly completed, the counter of [Number of Scanning] on the Scan Adjustment Chart screen is added by one, and the blue frame displayed in the illustration on the screen shifts to the next one on the right side.
  • Page 58 Both Sides Adjustment Repeat the scanning steps 12 to 14 four times for every adjustment chart. First time: Set the front side of the adjustment chart face up (turned away from the original glass), with its top edge positioned to the back side. Second time: Set the front side of the adjustment chart face up (turned away from the original glass), with its bottom edge...
  • Page 59 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Select whether to continue the scan measurement or to finish the scan measurement and calculate the adjustment value. To continue the scan measurement, press [No]. To finish the scan measurement and calculate the adjustment value, press [Yes]. Pressing [No] returns to the [Scan Adjustment Chart] screen on which the counter of [Chart Sheets] is added by one.

  • Page 60: Gap Adjustment

    Both Sides Adjustment Press [Close] to exit the adjustment. Scan Measurement Adjustment is then completed. To register adjustment values in a paper profile, press [Register]. For details about how to register a paper profile, refer to the HTML User's Guide. )Gap Adjustment To adjust a gap, print out a chart, measure a gap between the front and back sides at the specified measurement point of the back side using a scale to determine the adjustment value, and enter it.
  • Page 61 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Both Sides Adj]. Select [Gap], then press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. Press [Exit Print Mode]. 5-11...
  • Page 62 Both Sides Adjustment Measure the gap between the front and back sides at each point of [a] to [d] on the [back] side of the printed out chart. This figure shows an example to measure [a]. The scale resolution is 0.5 mm. In this figure, the black line indicates the front side, and the blue line indicates the back side.
  • Page 63 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L When entry processing is completed, press [Adjustment Start]. The entered adjustment values are applied. If [Back Side Magnification Adjustment] is set to [OFF], the value of [d] (adjustment value of the transverse magnification (Horizontal) on the back side) is not applied.
  • Page 64 Both Sides Adjustment After the adjustment is completed, press [OK]. To finely adjust the adjustment value, continuously proceed to step 4 in "Zoom and Image Shift Adjustment" (page 5-22). Press [Close] to exit the adjustment. Gap Adjustment is then completed. To register adjustment values in a paper profile, press [Register].

  • Page 65: Chart Adjustment

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Chart Adjustment You can print out a Both Sides Adjustment chart, measure measurement points using a scale, and enter measurement values in order to carry out the adjustment. Using this function, you can only enter measurement values to carry out the both-side adjustment. This is convenient when an unclear misalignment is detected between the front and back sides to perform the duplex printing with a new type of paper or to change paper in a tray.
  • Page 66 Both Sides Adjustment Select [Front], then press [Chart Adjustment]. Press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. Press [Exit Print Mode]. 5-16...
  • Page 67 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Measure the line length at each of points [1] to [8] on the printed-out chart using a scale. The figure on the right illustrates an example [ 5 ] [ 1 ] to measure points [1] and [5]. As illustrated in this example, measure the line length at each printed point.
  • Page 68 Both Sides Adjustment When entry processing is completed, press [Adjustment Start]. In the next step, adjust the back side. Select [Back], then press [Chart Adjustment]. Press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel.
  • Page 69 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Exit Print Mode]. Measure a misalignment between the marks of [1] to [4] printed on the [back] side of the output chart and the marks on the [front] side. The figure shows an example to measure [1]. The scale resolution is 0.5 mm.
  • Page 70 Both Sides Adjustment Press [X] or [Y] at each point, and enter the measured value using the keypad, [,], or [+] on the screen. If the printing position is misaligned to the minus (-) side, enter a positive value (+). If the printing position is misaligned to the plus (+) side, enter a negative value (-).
  • Page 71 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Close] to exit the adjustment. Chart Adjustment is then completed. To register adjustment values in a paper profile, press [Register]. For details about how to register a paper profile, refer to the HTML User's Guide. 5-21...

  • Page 72: Zoom And Image Shift Adjustment

    Both Sides Adjustment )Zoom and Image Shift Adjustment You can finely adjust the zoom ratio of the print side and the top, bottom, left, and right positions on the front and back sides. Using this function can directly enter the adjustment value in percentage or with the required value. This is convenient when you want to carry out fine adjustment after the chart adjustment or you have the duplex printing result.
  • Page 73 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Front] or [Back] to select the print side to be adjusted. Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value.
  • Page 74 Both Sides Adjustment Zoom ratio adjustment example: The image on the front side is 10 mm in a lengthwise direction while the image on the back side has been lengthened to 10.1 mm. Press [Vertical] of [Back], then press [1][0][0]. Then, press [+/-] to change the mark to set the adjustment value to [-1.00].

  • Page 75: Image Quality Adjustment

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Image Quality Adjustment Image Quality adjustment Adjust the color image quality at periodic intervals to maintain consistent printing results against a change in ambient temperature or humidity, a change of this machine conditions, or a change of the color tone due to the paper type or print mode.

  • Page 76: Daily Image Quality Management (Calibration)

    Image Quality Adjustment Daily image quality management (Calibration) You can maintain the color image quality by executing calibration at the appropriate timing. The reference value (target) of the entire printing system is registered in advance. Compare this reference value with the current measurement value to adjust the difference, and correct the printing density.

  • Page 77: Calibration Timing

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Calibration timing Adjust the daily color image quality at the times and in the order shown below. The adjustment method varies depending on whether or not the Relay Unit RU-509 is installed on the machine. Daily adjustment flow (Standard) This adjustment is required for all customers in daily operations.
  • Page 78 Image Quality Adjustment Daily adjustment flow (High) In addition to "Daily Adjustment Flow (Standard)", carry out adjustments in the following cases, in particular: Immediately before an image, in which the hue is important, is output When the color stability is insufficient (when enhancing the reproducibility) When the paper type is different Order Menu item...

  • Page 79: Maximum Density Auto Adjustment (Ru)

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Maximum Density Auto Adjustment (RU) Automatically adjust the maximum density of each of yellow, magenta, cyan, and black, using the output paper density sensor that is installed on the optional Relay Unit RU-509. Carry out this function before carrying out the [Color Density Control] function.
  • Page 80 Image Quality Adjustment Load the paper that has been used to register the target density into the tray. The paper profile of the tray is automatically switched to the paper profile that has been used to register the target density. Select the tray containing paper, then press [OK].

  • Page 81: Color Density Control

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Color Density Control If an optional Relay Unit RU-509 is mounted on this machine, you can configure a setting so that this machine automatically executes calibration at periodic intervals. Calibration is executed every arbitrarily specified number of sheets, and you can keep printing using the appropriate density.
  • Page 82 Image Quality Adjustment Specify each item as follows: [Use Color Density Control] ... [ON] [Periodical Adj. Execution] ... [ON] [Adjustment Execution Timing] ... [Before Job Start] [Chart Tray Setting] ... [OFF] Press [Next]. Specify each item as follows: [Switch Color (1st or 2nd)] ... [Precise] NOTICE Select [Precise] or [Normal] depending on the situation.
  • Page 83 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Close]. Press [Exit [ADJUSTMENT]]. Automatic Adjustment is set. A chart is printed out periodically, and calibration is carried out automatically. Tips Selecting [Color Density Manual Control] can carry out the manual adjustment. 5-33...

  • Page 84: Manual Setting Of Color Density Manual Control

    Image Quality Adjustment )Manual setting of Color Density Manual Control Press [Adjustment] on the [MACHINE] screen. Press [Color Density Control]. Press [Color Density Manual Control]. This function is available only when [Use Color Density Control] is set to [ON] in [Color Density Control] - [Basic Setting].
  • Page 85 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Quality Adj.]. Press [)] of [Screen Pattern] to select a screen. Press [Close]. Press Start. A chart is printed out, and calibration is carried out. 5-35...

  • Page 86: Executing Calibration Using The Image Controller

    Image Quality Adjustment Executing calibration using the image controller This guide describes how to carry out calibration for daily maintenance using Color Centro and a colorimeter (FD- 5BT). In addition, "Exact Color" or "G7 Calibration", which enables higher accuracy adjustment are available. For details, refer to the HTML User's Guide.
  • Page 87 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Select [Instrument] on the [Settings] menu, then select [FD-5BT(M0)]. Click [Settings] in [1. Paper Type / Screen Settings]. Select [Paper Type] and [Screen Settings] required for calibration, then click [OK]. 5-37...
  • Page 88 Image Quality Adjustment Click [Start Calibration]. Click [Print]. Select the paper tray required to print out a chart, then click [Print]. A chart is printed out a short while after this machine started running. 5-38...
  • Page 89 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Click [Start]. When a message appears, place the FD-5BT on the white calibration plate, then click [OK] while holding it down. NOTICE When the FD-5BT is placed on the plate, it does not come into contact with the white calibration plate. Securely press down.
  • Page 90 Image Quality Adjustment Place the FD-5BT ruler on the chart, while aligning the protrusion of the FD- 5BT with the ruler guide. To use the FD-5BT for measurement, remove it from the target mask. Carry out the measurement in sequence from row A. Hold down the side button of the FD-5BT.
  • Page 91 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L When the measurement is completed, click [Register]. Unregistered calibration data is erased when Color Centro is closed. When the message is displayed, click [OK]. Check the calibration data measurement result using the graph displayed in the [Density Output] area. To change and check the contents of the graph displayed in the [Density Output] area, adjust the check boxes.
  • Page 92 Image Quality Adjustment Click [Close] to exit calibration. Tips To view the previous calibration setting, select [Check the Status]. 5-42...

  • Page 93: Specifying The Reference Image Quality

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifying the reference image quality To stabilize the image quality of this machine, specify the reference values (targets) of the entire printing system in advance. If you change the setting value in [Custom Screen], hue variations may be drastically changed. If you change the screen, specify the standard image quality following the procedure to avoid hue variations.

  • Page 94: Adjusting The Finisher And Saddle Stitcher

    Adjusting the Finisher and Saddle Stitcher Adjusting the Finisher and Saddle Stitcher Opening the screen to be adjusted When the finisher or saddle stitcher is mounted on this machine, you can finely adjust various functions such as fold positions or staple positions. Reference For details about how to adjust the finisher, refer to the HTML User's Guide.

  • Page 95: Adjustable Settings

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press the items to be adjusted. The items displayed on this screen vary depending on the model of the mounted finisher. )Adjustable settings The following shows item examples that are displayed on the screen. The items displayed on this screen vary depending on the model of the mounted optional device.
  • Page 96 Adjusting the Finisher and Saddle Stitcher Setting item Description [Fold & Staple Stopper] Adjusts the staple position to reduce the misalignment between the fold and the staples. [Half-Fold Stopper Adj.] Adjusts the half-fold stopper position. [Punch Adjustment] Adjusts punch positions. [Tri-Fold Adjustment] Adjusts tri-folding positions.

  • Page 97: Troubleshooting

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Troubleshooting Replenish and Replace Consumables )Replacing a toner bottle WARNING WARNING WARNING Do not throw the toner bottle or toner into an open flame. The hot toner may scatter and cause burns or other damage. CAUTION CAUTION Do not leave toner-related parts (toner bottles or PC drum units) within easy reach of children.
  • Page 98 Replenish and Replace Consumables NOTICE To replace a toner bottle, check the toner type number indicated on the toner bottle cover. Use of incorrect toner bottles may cause the machine trouble. Press on the upper-right corner of the touch panel or Help on the control panel to display the help message.

  • Page 99: Replacing A Staple Cartridge

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Replacing a staple cartridge If staples run out, the message [Please add staples to the saddle stitcher left side stapler] is displayed on the [MACHINE] screen, and the [Staple Cartridge] indicator changes to red in the [Consumable and Scrap Indicators] display.
  • Page 100 Replenish and Replace Consumables Press the [Add Stapler] tab of the required saddle stitcher, then follow the on-screen instructions to replace a staple cartridge. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,].

  • Page 101: Replacing A Waste Toner Box

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Replacing a waste toner box WARNING WARNING WARNING NEVER throw the waste toner box into a fire. Otherwise, the toner may ignite and cause a dangerous situation. If the waste toner box fills up with waste toner, the message [Waste toner box is full Please replace the box] is displayed on the [MACHINE] screen, and the [Waste Toner Box] indicator changes to red in the [Consumable and Scrap Indicators] display.
  • Page 102 Replenish and Replace Consumables Press [Consumable/Scrap]. Press the [Waste Toner] tab, then follow the on-screen instructions to replace the waste toner box. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,].

  • Page 103: Clearing Paper Jams

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Clearing Paper Jams How to view the animation guide If a paper jam occurs on this machine, the message [Mishandled paper / Please remove paper following the guide] is displayed, and the position of the paper jam is displayed on the screen. Check the paper jam position, then follow the guidance to clear a paper jam.

  • Page 104: Illustration Screen For Jam Handling

    Clearing Paper Jams )Illustration screen for Jam handling The overview of the method required to clear the jam is displayed on the [JAM Position] screen. Changing to the Illustration screen displays the procedure guidance, so you can clear a paper jam while checking each step. Press [Illustration] on the [JAM Position] screen.
  • Page 105 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Remove all jammed paper, then press [Close]. This returns to the [MACHINE] screen. Tips If the paper jam message has not been yet cleared even after all the jammed paper has been removed, the paper jam may have occurred in a place other than the one displayed.

  • Page 106: If The Specified Paper Is Not Found

    If the Specified Paper is not Found If the Specified Paper is not Found If the specified paper is not loaded into a tray at the time of printing, the message [Please load designated xxx paper / To check details, touch [Confirm Details]] is displayed on the screen. To address this problem, load the specified paper into a tray, or you can forcibly print on the currently loaded paper of a different size.
  • Page 107 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Replace paper into the tray, then press [OK]. Press Start on the control panel. Printing starts using the selected tray. 6-11...

  • Page 108: Forcibly Printing Using The Loaded Paper

    If the Specified Paper is not Found )Forcibly printing using the loaded paper Press [Confirm Details] on the [MACHINE] screen. Select a tray with print paper loaded, then press [Forced Output]. Press Start on the control panel. Printing starts using the selected tray. 6-12...

  • Page 109: If An Error Has Been Displayed During Scanning

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L If an Error has been Displayed during Scanning If a problem such as an HDD space insufficiency has occurred, an error message is displayed. Check the message content, then take the appropriate action. This section describes how to handle an HDD space insufficiency. )HDD space insufficiency If there is not enough HDD space available, an error may occur during scanning.

  • Page 110: Hue Adjustment

    Hue Adjustment Hue Adjustment Various problems, for example, the current hue is different from the previous one or the expected chromogenic effect has not been obtained, are caused due to a change in ambient temperature or humidity, a change of the machine conditions, or a change of the color tone by the paper type or print mode.

  • Page 111: Image Position Adjustment

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Image Position Adjustment The previously adjusted image position may be misaligned by a slight enlargement or reduction of paper that is caused due to a change in ambient temperature or humidity, a change of the machine conditions, usage of a different type of paper, or heat impact of the Fusing Unit.

  • Page 112: Appendix

    Good Use of the HTML User's Guide Appendix Good Use of the HTML User's Guide The HTML User's Guide is included in the User's Guide CD supplied with this machine. Select the desired item on the top page (Home), then check the detailed contents. To view the details about how to use the HTML User's Guide, select [User's Guides] on the top page (Home).

  • Page 113: Name Of Each Component

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Name of each Component External components Name Description ADF (Option) Scans data while automatically feeding an original page by page. This device automatically inverts a double-sided original to scan data. This device cannot be installed on the Printer Model. Sub power switch Turns the sub power of the machine on or off.
  • Page 114 Name of each Component Name Description Dust proof filter A dust proof filter is installed in the built-in cooling fan to keep out dust. Power cord Supplies this machine with electricity. Image Controller IC-602 Required to use this machine as a printer or scanner. Port (type B) (USB 2.0/1.1 compati- Connected to use this machine as a USB-connected printer.

  • Page 115: Internal Components

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Internal components Name Description Main power switch Turns the main power of the machine on or off. The main power is basically turned on or off by your service rep- resentative. Be sure not to turn the main power switch off in usu- al operation.
  • Page 116 Name of each Component Name Description Conveyance fixing unit Pulled out to remove jammed paper. For information about how to handle levers and knobs of the conveyance fixing unit, refer to the screen displayed when a paper jam has occurred. Lever [M1] Locks the conveyance fixing unit.

  • Page 117: Control Panel Layout

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Control Panel Layout Name Description Keypad Enter the values such as the number of copies or the zoom ratio. Reset* Returns the contents you entered or changed on the control panel to the default settings. Power LED Lights up in red when the main power switch is turned on, then lights up in green when the sub power switch is turned on.
  • Page 118 Name of each Component Name Description Start LED Indicates the status of this machine with LED colors. • Light up in blue: This machine is ready to start operations. • Light up in orange: This machine is not ready to start opera- tions.

  • Page 119: Convenient Use Of Scan Function (Scan To Smb)

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Convenient Use of Scan Function (Scan to SMB) You can send the scan data as an E-mail attachment, send it to a shared computer (SMB server), the FTP server, or the WebDAV server, or save it to the USB flash drive installed on this machine. This section describes the function (Scan to SMB) to send data to the SMB server.

  • Page 120: In A Macintosh Environment

    Convenient Use of Scan Function (Scan to SMB) Enable file sharing. In Windows 7/8/8.1, select [Control Panel] - [Network and Internet] - [Network and Sharing Center] - [Change advanced sharing settings], then click [Turn on file and printer sharing] in the [Advanced sharing settings] window.

  • Page 121: Step 2: Connect This Machine To The Network

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Enable the SMB-base sharing. Click [Options] on the [Sharing] window, select the [Share files and folders using SMB (Windows)] check box, then select the check box of the login user name (displayed name). Set to a shared folder. Click [+] on the [Sharing] window, select a folder to be shared, then click [Add].

  • Page 122: Major Specifications

    Major Specifications Major Specifications NOTICE The specifications of the machine and optional device are subject to a change without notice. Even if the specified paper size and weight are compatible with an optional device, if they are not supported by the entire system including the machine, the paper may not be able to be used.

  • Page 123: Feeding-Related Optional Devices

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Feeding-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Paper Feeder Unit PF-602m Paper tray 1: Tray 3 (upper tray) 2: Tray 4 (lower tray)

  • Page 124: Paper Feeder Unit Pf-707

    Major Specifications )Paper Feeder Unit PF-707 Paper tray 1: Tray 3 (upper tray) 2: Tray 4 (middle tray) 3: Tray 5 (lower tray) Specifications Paper weight 55 g/m to 350 g/m / 13 lb Bond to 93 lb Bond • Coated paper: 81 g/m to 300 g/m / 22 lb Bond to 81 lb Bond...

  • Page 125: Large Capacity Unit Lu-202

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Large Capacity Unit LU-202 Paper tray Specifications Paper weight 64 g/m to 300 g/m / 17 lb Bond to 81 lb Bond • Coated paper: 81 g/m to 300 g/m / 22 lb Bond to 81 lb Bond Paper size •...

  • Page 126: Multi Bypass Tray Mb-506

    Major Specifications )Multi Bypass Tray MB-506 Paper tray 1: Multi Bypass Tray Specifications Paper weight 62 g/m to 300 g/m / 16 lb Bond to 81 lb Bond 300 g/m / 81 lb Bond has the paper types limited. Paper size •...

  • Page 127: Post Inserter (Folding Unit Fd-503)

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Post Inserter (Folding Unit FD-503) You can load paper into the upper and lower trays of Folding Unit FD-503 and feed paper to an output-related optional device. On the control panel of the post inserter, you can configure the punch or fold function for paper to be fed from the lower tray.

  • Page 128: Post Inserter Pi-502

    Major Specifications )Post Inserter PI-502 To use Post Inserter PI-502, mount it in one of Finisher FS-531/FS-532/FS-612. You can load paper into the upper and lower trays of Post Inserter PI-502 and feed paper to an output-related optional device. On the control panel of Post Inserter PI-502, you can configure the punch, staple, or fold function for paper to be fed from the lower tray (the configurable function varies depending on finisher models).

  • Page 129: Output-Related Optional Devices

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Output-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Relay Unit RU-509 Conveyance Unit Specifications Function...

  • Page 130: Relay Unit Ru-516

    Major Specifications Specifications Paper size • SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, A6 w, 13 e 19 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 9 e 11 v, 8.5 e 11 w/v, 5.5 e 8.5 w/v, 8K w, 16K w/v, Foolscap* Tab Paper: A4T v, 8.5 e 11T v •...
  • Page 131 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifications: Straight delivery Sheet volume Primary (main) tray • 2,500 sheets (80 g/m / 21 lb Bond): A4 w/v, B5 w/v, 9 e 11 v, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 16K w/v •...

  • Page 132: Large Capacity Stacker Ls-505

    Major Specifications )Large Capacity Stacker LS-505 Output tray 1: Stacker tray 2: Secondary (sub) tray Specifications Function • Stacker tray with carriage • Sort output / group output (Offset output enabled) Paper weight Stacker tray: 50 g/m to 244 g/m / 13 lb Bond to 65 lb Bond Secondary (sub) tray: 40 g/m to 350 g/m...

  • Page 133: Large Capacity Stacker Ls-506

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Large Capacity Stacker LS-506 Output tray 1: Stacker tray 2: Secondary (sub) tray Specifications Function • Stacker tray with carriage • Sort output / group output (Offset output enabled) Paper weight Stacker tray: 50 g/m to 350 g/m / 13 lb Bond to 93 lb Bond Secondary (sub) tray: 40 g/m...

  • Page 134: Saddle Stitcher Sd-506

    Major Specifications )Saddle Stitcher SD-506 Output tray Function Fold & Staple Multi Half-Fold Multi Tri-Fold Multi Half-Fold + Trimming Specifications: Fold & Staple Paper weight 50 g/m to 244 g/m / 13 lb Bond to 65 lb Bond SRA3 w, A3 w, B4 w, SRA4 w, A4 w, B5 w, Paper size •...

  • Page 135: Perfect Binder Pb-503

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifications: Trim Paper weight 50 g/m to 244 g/m / 13 lb Bond to 65 lb Bond Paper size • SRA3 w, A3 w, B4 w, SRA4 w, A4 w, B5 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 7.25 e 10.5 w, 8K w, 16K w, Foolscap* •...

  • Page 136: Finisher Fs-531

    Major Specifications )Finisher FS-531 To use the punch function, the Punch Kit PK-512 or Punch Kit PK-513 is required. Output tray Function Staple Punch 1: Primary (main) tray 2: Secondary (sub) tray Specifications: Straight delivery Paper weight 60 g/m to 300 g/m / 16 lb Bond to 80 lb Bond Paper size Primary (main) tray...
  • Page 137 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifications: Staple Paper weight 60 g/m to 209 g/m / 15 lb Bond to 56 lb Bond Paper size • A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 5.5 e 8.5 v, 8K w, 16K w/v, Foolscap* Tab Paper: A4T v, 8.5 e 11T v •...

  • Page 138: Finisher Fs-532

    Major Specifications )Finisher FS-532 To use the punch function, the Punch Kit PK-522 is required. Saddle Stitcher SD-510 is required to use the Multi Half-Fold, Multi Tri-Fold, and Fold & Staple functions. Output tray Function Staple Punch Multi Half-Fold Multi Tri-Fold Fold &...
  • Page 139 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifications: Staple Paper size • SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 v, A5 v, 13 e 19 w, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 v, 5.5 e 8.5 v, 8K w, 16K v, Foolscap* •...
  • Page 140 Major Specifications Specifications: Staple Number of stored copies • 150 sets (2 to 9 sheets stapled, Paper length: 182 mm to 364 mm / 7" to 14" • 75 sets (2 to 9 sheets stapled, Paper length: Other than 182 mm to 364 mm / 7"...

  • Page 141: Finisher Fs-612

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifications: Multi Half-Fold / Multi Tri-Fold (with Saddle Stitcher SD-510 mounted) Sheet volume Maximum number of multiple sheets • Multi Half-Fold 50 g/m to 216 g/m / 13 lb Bond to 57 lb Bond: 5 sheets 217 g/m to 300 g/m / 58 lb Bond to 81 lb Bond: 1 sheets...
  • Page 142 Major Specifications Specifications: Staple Paper weight 60 g/m to 105 g/m / 16 lb Bond to 28 lb Bond A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v, Paper size • 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 5.5 e 8.5 v, 8K w, 16K w/v, Foolscap* •...
  • Page 143 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifications: Half-Fold / Tri-Fold Paper weight 60 g/m to 105 g/m / 16 lb Bond to 28 lb Bond Paper size Half-Fold output A3 w, B4 w, SRA4 w, A4 w, • 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 8K w •...

  • Page 144: Multi Puncher Gp-501

    Major Specifications )Multi Puncher GP-501 Conveyance Unit Function Punch The punch-hole pattern varies according to the die set. For details, refer to the HTML User's Guide. Specifications Function Bypass mode • Transports paper without punch processing. Punch mode • Carries out punch processing through a punch path (return path) •...

  • Page 145: Auto Ring Binder Gp-502

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Auto Ring Binder GP-502 Binder Unit Function Bind Specifications Paper weight Body: 75 g/m to 120 g/m / 20 lb Bond to 32 lb BondCover: 163 g/m to 216 g/m / 44 lb Bond to 57 lb BondTabbed paper: 163 g/m max.

  • Page 146: Banner Tray Unit Mk-740

    Major Specifications )Banner Tray Unit MK-740 Feeding extension tray, Output extension tray 1: Feeding extension tray 2: Output extension tray Specifications Applicable Feeding exten- Multi Bypass Tray MB-506 unit sion tray Output exten- Output Tray OT-502 sion tray Finisher FS-531 Finisher FS-612 Function banner printing...

  • Page 147: Electronic Optional Devices

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Electronic optional devices Reference For information about optional devices not described below, refer to the HTML User's Guide. )Image Controller IC-602 Specifications Function Built-in image controller Capacity • HDD capacity: 200 GB or more (The HDD in the main body is used partially.) •...

  • Page 148: Original-Related Optional Devices

    Major Specifications Original-related optional devices )Reverse Automatic Document Feeder DF-626 This device does not support the Printer Model. Document Feeder Specifications Function • Simplex original feeding • Duplex original feeding Original type • Simplex original: 35 g/m to 210 g/m / 10 lb Bond to 57 lb Bond •...

  • Page 149: Weight For Each Size And Copying Speed

    bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Weight for each size and copying speed NOTICE The product specifications are subject to a change without notice. )Weight for each size The paper weight (g/m / lb Bond) or ream weight (kg) unit is used to indicate the paper thickness, which varies depending on the manufacturer.
  • Page 150 Weight for each size and copying speed bizhub PRESS C1070/bizhub PRESS C1070P/bizhub PRESS C71hc Temperature de- Paper weight 1-minute copying speed (at 1-sided output with plain paper A4 v / 8.5 e 11 v) tected by Humidi- (g/m / lb Bond)
  • Page 151 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L bizhub PRESS C1060/bizhub PRO C1060L Temperature de- Paper weight 1-minute copying speed (at 1-sided output with plain paper A4 tected by Humidi- (g/m / lb Bond) v / 8.5 e 11 v) ty/Temperature Normal setting When [Glossy] is selected Sensor 61 pages (A4 v)

  • Page 152: Maximum Paper Size And Printing Area

    Maximum paper size and printing area Maximum paper size and printing area The maximum paper size and printing area that are available are as follows. Refer them when you output data or perform an imposition printing. When using the Tray 2 (Main body lower tray): 487.7 mm / 19.20"...
  • Page 153 bizhub PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L MEMO 7-42...
  • Page 154 MEMO 7-43...
  • Page 155 http://www.konicaminolta.com Printed in China A50U956123 2015. 1 © 2013...

This manual is also suitable for:

Bizhub press c1070Bizhub pro c1060lBizhub press c71hcBizhub press c1060

Table of Contents