Konica Minolta bizhub PRO C5500 Solution Manual page 81

bizhub PRO C5500
TAUS0702744EN*
Solution ID
Description
FS-607, how to perform the punch vertical position adjustment (front-to-back).
Solution
To perform the punch vertical position adjustment (front-to-back), perform the following:
1. Press the Utility/Counter key.
2. Press Stop-0-0-Stop-0-1.
3. Touch [07 Finisher Adjustment] on the touchscreen.
4. Touch [03 Punch Adjustment] on the touchscreen.
5. Touch [01 Vertical Position Adj.] on the touchscreen.
6. Use the up-down keys to scroll to the paper size you want to adjust.
7. Touch and highlight the desired paper size you want to adjust.
8. Input the desired adjustment value on the touchscreen.
9. Touch [SET] on the touchscreen.
10. Touch [COPY] on the touchscreen.
11. Press the START key. A single punched page will be output. Fold the output paper in half in the main scan direction and observe the position of the
middle hole position in relation to the center of the paper. The standard value of the hole position is +/- 1 mm. If, the position is not proper touch [SERVICE]
on the touchscreen.
12. Repeat steps 6 through 9 until the hole position in relation to the center of the page is properly positioned.
13. Touch [SERVICE] on the touchscreen.
14. Touch [Return] on the touchscreen.
15. Touch [Exit] on the touchscreen.
16. Touch [Exit] on the touchscreen.
SPECIAL NOTE : Solution contribution by David Aekus, Production Print/SSD
Solution ID TAUS0702766EN*
Description
Specifications and configuration information for the bizhub PRO C5500.
Solution
See attachment (specs_config_c5500.zip) for specifications and configuration information.
Note: To open the file(s) using WinZip®, WinZip® must be installed. WinZip® can be downloaded from the WinZip® website:
http://www.winzip.com/ddchomea.htm . The file can either be saved to disk or opened. It is recommended to download the ZIP and open from the local
computer to view.
Solution ID TAUS0702767EN*
Description
User's Manuals for the bizhub PRO C5500.
Solution
User's Manuals for the bizhubPRO C5500are available on the http://www.kmbs.konicaminolta.us/ website.
Solution ID TAUS0702883EN*
Description
How to enable the Service Port for mouse and keyboard support.
Solution
To enable the Service Port for mouse and keyboard support, perform the following:
1. The "Service Port Device" must be set to [ON] in the settings menu mode of the:
[02] User Setting
[01] System Setting
[12] Service Port Device
2. Set Service Port Device = ON, Keyboard Type = EN65 and click OK.
Note : Please refer to the attached document for additional detail. To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded
for free from the Adobe® web site at: http://www.adobe.com/products/acrobat/readstep2.html
SPECIAL NOTE : Solution contribution by Cesar Jimenez, Production Print/SSD
TAUS0702889EN*
Solution ID
Description
Printing to a printer on a Microsoft® Windows XP PC from a Macintosh® OS version 10.3.
Copyright , Konica Minolta Business Solutions U.S.A., Inc.
81
Miscellaneous
Solution Usage
Solution Usage
Solution Usage
Solution Usage
Solution Usage
March 2010