KMBT toners are not certified as "food grade" under US FDA regulations. As such, the use of KMBS products for the printing of placemats that will come into

contact with food is not recommended.

SPECIAL NOTE : Solution contribution by Gregg Gallant, Production Print/SSD

Solution ID

TAUS0801440EN*

Description

Part number for the wiring from the Toner Control Sensors (TCR) to the printer control board (PRCB).

Solution

This hard-to-find wiring part can be found on page 88 of the Field Service Parts Manual, Process Detection Wiring /2 (p/n A03U N111 02).

SPECIAL NOTE : Solution contribution by Freddie Burnham, Production Print/SSD

Solution ID

TAUS0801506EN*

Description

DipSW 10-6 information.

Solution

1. From bizhub PRO C6500/C6500P firmware version 30 and bizhub PRO C5500 firmware version 12, DipSW 10-6 has beenestablished. Depending on this

DipSW setting, the count increment value of Large size count on the 2nd page of the Management list may differ from the earlier version firmware.

2. Operation of DipSW 10-6:

Affecting Copy/print corresponding to DipSW 4-6, 4-7 = 1

Changing only the increment value of Large size count. For the details of the operation, please refer to the attached file.

3. CAUTION : If one or both of DipSW 4-6 and DipSW 4-7 is/are set to 1 (Increment 2 counts for large size), the increment value of Large size count on the

2nd page of the Management list may change between before or after installing the version 30/version 12 firmware. In that case, please refer to the attached

file and setDipSW 10-6 properly.

Note : To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:

http://www.adobe.com/products/acrobat/readstep2.html .

SPECIAL NOTE : Solution contribution by KMBT (Japan).

Solution ID

TAUS0801567EN*

Description

Office Workgroup and Production Print - Basic Functionality Chart (Marketing Bulletin 08_GB_024).

Solution

Konica Minolta is pleased to announce a new sales tool called the Office Workgroup and Production Print - Basic Functionality Chart (see attachment). This

chart has been developed to give you a broad overview of the basic functionality on all current Office Workgroup MFPs and Production Print Systems.

This 'at-a-glance' chart will be helpful to determine product families, standard and optional features, print and scan PPM speeds, copy, print controller, local

and network scanning destinations and lastly fax functionality.

Models associated with the chart are: bizhub 160, 161f, 181, 200, C203, 250, C253, 350, C353, C353P, 360, 421, C451, 501, C550, 600, C650, 750 and

bizhub PRO C5500, C6500, 920, 1050e.

This chart will be associated under Support Materials or individual product pages for each model listed on MyKonicaMinolta.com.

Note : To viewthe PDF, Adobe Reader® must be installed. Adobe Reader® can be downloaded for free from the Adobe® web site at:

http://www.adobe.com/products/acrobat/readstep2.html .

Solution ID

TAUS0801793EN*

Description

Version 40 firmware information.

Solution

The firmware is available for download via the SSD support site;