Samsung OfficeServ 7100 Technical Manual page 688

OfficeServ 7100
TECHNICAL MANUAL
The Instructions field is set to 10$T by default. This is actually a feature code
designation set in the FEATURES section of MMC 724. By default 10 is the Page
Pickup feature. This feature is activated by dialing 10 and then a trunk number.
So remembering the Special Dialing Characters section we know that $T will
insert the trunk number the caller is currently connected on. So 10$T will alert
the subscriber to dial 10 and the correct trunk number. But since we are going to
use remote hold we actually want to pick the caller up from hold at the
subscriber's station, which by default is feature code 12. Feature cold 12 (Hold
Pickup) does not accept trunk numbers, however, it requires Extension numbers,
so we will need to change $T to $X.
Once the EClass is configured all that is left to do is assign the subscriber's
Extension block to use that EClass. So let's get programming!
Programming:
Create a new EClass named ParkNPage.
On the General screen set the NoAnsr option for Overhead page to Y and click
Save.
On the OverHead Page screen set Use Remote hold to Yes.
Set Remote hold dial to $X,11.
Set Page access dial to 55*.
Change the Instructions field to 12$X and click Save.
Open the subscriber's Extension block.
Click the EClass field and select the ParkNPage block.
Test the application by calling the subscriber, forwarding to voicemail, and
pressing 3 to page the subscriber.
8.1.8.5 Park Mobile Phone Message Notification
Scenario:
A customer wants to be called on her cell phone when she gets new messages
in her office voicemail box.
Planning:
We know that the Mailbox block offers a feature called Message Alert. This is
exactly the application for that feature.
On the Alerts page of the Mailbox block there are 3 settings for Message Alert.
Message alert is currently on determines if notification is enabled or not. Alert on
urgent messages only determines which type of new messages will cause a
notification. Alert phone number is the actual number to call for the notification.
8.1.13
Table of Contents
Home Page
PROGRAMMING
PART 8 APRIL 2007