Samsung OfficeServ 7100 Technical Manual page 578

OfficeServ 7100
TECHNICAL MANUAL
Open Block Table
DESCRIPTION:
The OfficeServ 7100 automated attendant is programmed with a series of
programming object called blocks. The Speak block is used to speak a prompt
to a caller and then route them to another block. Speak blocks are typically used
to make standard announcements, such as directions or operating hours.
SELECTION SCREEN:
To edit a block click the Label Name.
5.3.56
Table of Contents
Home Page
PROGRAMMING
PART 5 APRIL 2007
Speak