Samsung OfficeServ 7100 Technical Manual page 143
Hide thumbs
Also See for OfficeServ 7100:
- Technical manual (330 pages) ,
- Service manual (291 pages) ,
- Installation manual (103 pages)
Advertisement
OfficeServ 7100
TECHNICAL MANUAL
MMC: 328
DESCRIPTION:
This MMC is used to configure MOBEX ports as well as Executive MOBEX users.
Executive MOBEX options will have no effect unless a valid MOBEX license exists in
MMC 860. If there are no MOBEX ports configured in MMC 857 this MMC is
unavailable.
TEL NUMBER: This setting specifies the trunk group and telephone number (up to
16 characters) to dial when this MOBEX port is accessed. The trunk group must be
labelled as a TYPE of ISDN TRUNKS in MMC 603 or calls to the MOBEX port will fail.
If LCR is in use you cannot enter the LCR access code (typically 9) as the trunk group
field or the call will fail.
CLI NUMBER: This setting is used for Executive MOBEX only. It specifies the caller
ID number the MOBEX feature should associate with this Executive user when the
user calls in to the MOBEX feature. The MOBEX feature is dialled into by setting a DID
in MMC 714 to ring directly to the MOBEX feature code set in MMC 724.
EXEC USER: This setting determines if the user is an Executive MOBEX user or not. If
more Executive users are assigned than are allowed by the MOBEX license in MMC
860 the excess users will be unable to access Executive features. This option will also
display the free licenses (FR:xxx) as well as the user's position in the Executive Users
list (L:xxx).
MASTER STN: This setting sets the physical keyset associated with the MOBEX port.
This setting is optional for standard MOBEX users, but is required for Executive
MOBEX users.
SVC STATUS: This setting determines if the MOBEX port is available for taking calls
or not. If the port is unavailable calls to the MOBEX port will error with an INVALID
NUMBER error.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER
Used to store data and advance to next MMC
HOLD
Used to clear previous entry
[Available Only with v.4.30 or Higher]
Home Page
PROGRAMMING
PART 2 MAY 2009
MOBEX INFO
Table of Contents
Advertisement
