Samsung OfficeServ 7100 Technical Manual page 125

OfficeServ 7100
TECHNICAL MANUAL
MMC: 312
DESCRIPTION:
Allows the system administrator or technician to allow or deny Caller Identification
(CID) and or Automatic Number Identification (ANI) data to be seen at display
keysets. CID and ANI information is essentially the same to the end user and is not
separated. ANI does not provide date and time stamps and is not available for
review. Each keyset can have the following options:
0 CID / ANI NOT ALLOWED
1 CID / ANI ALLOWED
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Press TRANSFER 312
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station
and press right soft key to move cursor
OR
Press ANS/RLS to select ALL.
3. Dial 0 or 1 to select option
OR
Press UP or DOWN to select option
and press right soft key to return to step 2.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to save and advance to next
MMC.
CID / ANI data will not be displayed.
CID / ANI data will be displayed.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
Home Page
PROGRAMMING
PART 2 APRIL 2007
ALLOW CID / ANI
DISPLAY
[201] CID/ANI
NOT ALLOW
[205] CID/ANI
NOT ALLOW
[ALL] CID/ANI
?
[ALL] CID/ANI
ALLOW
[201] CID/ANI
ALLOW
Table of Contents