Samsung OfficeServ 7100 Technical Manual page 341

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

DESCRIPTION:

This MMC is used to configure options for the mbedded Samsung Voicemail.

SVM AUTO SETUP

When the SVM starts, part of the startup procedure is to poll the OfficeServ 7100

for various data such as system date and time and the current ring plan. In addition

to this the OS7100 can also tell the SVM what Extension and Mailbox blocks to build

as well as what trunks exist in the system. This option determines if this data should

be sent to the SVM or not. The default setting is YES, which means that data will be

sent to the SVM upon each SVM reboot.

NOTE: To save boot time for the SVM it is recommended that after performing this

download once, and ensuring all data downloaded properly in the SVM, that you

set SVM AUTO SETUP to NO.

DOWNLOAD OPTIONS

When the SVM AUTO SETUP option is set to YES the OS7100 will send

configuration data to the SVM. This submenu allows you to choose which

information will be downloaded.

STATION NAME

VIR. DLI/SLI

[Applies to v.4.30 or Higher]

This setting will allow the Subscriber name in the SVM to sync

with the Station Name in MMC 104. This is a bidirectional

synchronization which means that changes to MMC 104 will

be sent to the SVM and changes in the SVM will be sent to

Download the information for DLI and SLI ports according to

Download the information for ITP keysets according to MMC

Download the information for WIP handsets according to

Download the information for SIP stations according to MMC

Download the information for Virtual DLI and SLI ports

according to MMC 741

Table of Contents

PART 2 MAY 2009