Samsung OfficeServ 7100 Technical Manual page 472

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

DESCRIPTION:

This MMC is used to view, store, print or clear system alarms. There are two levels

of faults displayed via alarm code, major alarms and minor alarms. Major alarms

codes are usually service affecting and require a certified technician to determine

the fault. A minor alarm indicates a fault that may or may not be service affecting

and usually does not seriously degrade the systems operating capabilities. The

alarm buffer will hold up to 100 alarms on a first in - first out (FIFO) basis. Alarms will

provide a date and time stamp based on the system time. If applicable the hardware

cabinet, port, and/or slot will be displayed.

ALARM REPORTING OPTIONS (Select one of the options)

OVERFLOW CONTROL

CLEAR ALARM BUF

PRINT ALARM BUF

ALARM CODE LOCATION DEFINITION (See Alarm Code Table)

C: Cabinet number

S: Slot number

P: Port number

Note: Cabinet, slot and port do not apply to all alarm codes

ALARM REPORTING

View alarm buffer

OVERWRITTEN − When buffer is full, the

oldest entry in buffer overwritten.

STOP RECORDING − When buffer is full, stop

recording alarms.

Clears alarm buffer.

Prints contents of alarm buffer to the assigned

alarm IO port.

Table of Contents

PART 2 APRIL 2007