Samsung OfficeServ 7100 Technical Manual page 195

OfficeServ 7100
TECHNICAL MANUAL
TIMER NAME
PARK RCALL TIME
AP-MMC LOCK OUT
PERI UCD REPORT
POWER DOWN TIME
RECALL DISCONECT
RECALL WAIT TIME
ROUTE OPTIMIZE
SMDR START/DP
SMDR START/DTMF
SYS HOLD RECALL
TRANSFER RECALL
TRK AUTOMOH DISC
TSW CONN. DEL
UCDS AUDIO ALARM
UCDS VISUAL ALAM
VOIP RE-ROUTE TM
*Also used for wake-up calls.
ALARM TIMER
ALERT TONE TIMER
ALM REM INTERVAL
ALM REM RING OFF
ATT RECALL TIME
AUTO REDIAL INT
AUTO REDIAL RLS
MMC: 501
TIMER DESCRIPTIONS
This is the time the system alarm key will start ringing after
the alarm key has been silenced.
This timer sets the duration of the attention tone preceding a
call to a keyset in the Voice Announce or Auto Answer
mode. This tone will also precede a forced Auto Answer call.
This timer controls the time length between ring attempts at
a station when alarm reminder is set. (Also used for wake-up
calls).
This timer controls the length of the ring cycle duration when
alarm reminder is set at a station. (Also used for wake-up
calls).
This is the length of time a transfer recall (hold or transfer)
will ring at an idle station before recalling the operator.
This timer controls the time between attempts after RETRY
dialing is set on a station.
This timer controls the duration of a Ring No Answer
condition on a retry number dialed before the auto redial is
automatically canceled.
Home Page
DEFAULT
45 SEC
5 MIN
05 SEC
2000 MS
002 MIN
15 SEC
10 SEC
30 SEC
15 SEC
45 SEC
20 SEC
60 SEC
00 SEC
0 SEC
0 SEC
5 SEC
Table of Contents
PROGRAMMING
PART 2 MAY 2009
RANGE
0–250 SEC
01–60 MIN
03-99 SEC
1000–9000 MS
1–250 SEC
000–250 SEC
0–250 SEC
1–250 SEC
1–250 SEC
0–250 SEC
0–250 SEC
001-250 SEC
00–10 SEC
0–990 SEC
0–990 SEC
2–25 SEC