Samsung OfficeServ 7100 Technical Manual page 397

OfficeServ 7100
TECHNICAL MANUAL
MMC: 823
DESCRIPTION:
This MMC is used to create new networking COS or change the default values of an
existing COS. This allows for multiple, different COS to be used. There are 30
network classes of service available. These classes of service follow the COS
assignments in MMC 301.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SPEAKER Used to store data and advance to next MMC
HOLD Used to delete an entry
ACTION
1. Press TRANSFER 823.
Display shows.
2. Press UP or DOWN key to select
COS and
press RIGHT soft key to move cursor.
3. Press UP or DOWN key to select option.
Press RIGHT soft key to move cursor.
4. Press UP or DOWN key to select YES
or NO.
Press RIGHT soft key to make change and
return to Step 2.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
Home Page
PROGRAMMING
PART 2 APRIL 2007
NETWORK COS
DISPLAY
NETWORK COS (01)
01: CALL OFFER: Y
NETWORK COS (05)
01: CALL OFFER: Y
NETWORK COS (05)
03:CC PATH RSV: Y
NETWORK COS (05)
03:CC PATH RSV: N
Table of Contents