Samsung OfficeServ 7100 Technical Manual page 117

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

DESCRIPTION:

Allows a station the ability to make a predetermined call similar to a ringdown

circuit, upon the expiration of a timer (see MMC 502 STN TIMERS, Off-Hook

Selection Timer). The hotline destination can be a station, a station group, a trunk, a

trunk group or an external number. There can be a maximum of 18 digits in the dial

string for the external number. The access code for the trunk or trunk group access

code is not counted as part of the 18.

PROGRAM KEYS

1. Press TRANSFER 306

Display shows

2. Dial station number

Use UP or DOWN to scroll through stations

Press RIGHT soft key to move the cursor.

3. Enter the hot line destination ie a station

or trunk ID (e.g., 9 or 701) with a maximum

of 24 outgoing digits after the access code

for the CO call (see above list of options if

Bottom row of program keys are options B–E.

Used to scroll through options

Used to enter selections

Move cursor left and right

Used to store data and advance to next MMC

Used to clear previous entry

Used to insert a flash code "F"

Used to insert a pause code "P"

Used to insert a pulse/tone conversion code "C"

Used to mask/unmask following digits—shows as "[" or "]"

Used to enter name for speed dial bin (see MMC 106)

PART 2 APRIL 2007

[201] HOT LINE

[205] HOT LINE

[205] HOT LINE

9-1305P4264100_

Table of Contents