Samsung OfficeServ 7100 Technical Manual page 313

OfficeServ 7100
TECHNICAL MANUAL
FEATURE
8
NUMBER
NETWORK
9
NUMBER
COUNT→
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
DIAL 9
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Press TRANSFER 724.
Display shows.
2. Press UP or DOWN key to make selection
and press RIGHT soft key to advance cursor.
MMC: 724
This is where feature access codes are changed or
assigned. Dialing codes are entered via the dial pad
key by pressing the dial pad number, the required
steps to select this feature. For example, for OHVA,
the number 6 would be pressed three times.
NOTE: Please remember that this program is
system-wide.
This is where Network LCR and Remote Station
directory numbers are changed or assigned.
Network LCR ports are used for Samsung system-to-
system networking.
Remote Stations are used to create local extensions
for remote devices.
FEATURE NUMBERING DIAL KEY PAD
1 2
ABAND BARGE
DGPALM E-LCR1
GRPK HDSET
LCR LCR
MACR NEW
PAGE PAGE
TCLIP UA
WAKEUP WAKEUP
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Home Page
PROGRAMMING
PART 2 MAY 2009
3 4
CAMP ABAND
FAUTO DGPALM
IG GRPK
LCR LCR
OHVA MACR
RB SETMG
VMADM TCLIP
WAKEUP WAKEUP
DISPLAY
STN NUMB. :C1-S05
DLI-01:201 ~
FEATURE NUMBER
ABAND :64 ~
Table of Contents