Samsung OfficeServ 7100 Technical Manual page 287

OfficeServ 7100
TECHNICAL MANUAL
MESSAGES 11-15 on the system are 16 character blank messages that can be
created.
NOTE: Each display keyset user can create 3 additional personal programmed
messages, 16~18 using MMC 115.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
"A" KEY
ACTION
1. Press TRANSFER 715.
Display shows.
2. Enter index number (e.g., 11)
OR
Press UP or DOWN arrow to make selection.
Press RIGHT soft key to move cursor.
3. Enter message via dial keypad using the
above table (maximum 16 characters).
Use "A" key to toggle upper case/lower
case.
Press RIGHT soft key to return to step 2.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: TEN PROGRAMMED MESSAGES AS DETAILED BELOW
01. IN A MEETING
02. OUT ON A CALL
03. OUT TO LUNCH
04. LEAVE A MESSAGE
MMC: 715
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Toggles from upper case to lower case
Home Page
PROGRAMMING
PART 2 APRIL 2007
DISPLAY
PGM.MESSAGE (01)
IN A MEETING
PGM.MESSAGE (11)
_
PGM.MESSAGE (11)
SunBathing
Table of Contents