Programming Overview - Samsung OfficeServ 7100 Technical Manual

Table of Contents
Home Page
OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 1 JANUARY 2009
PART 1. INTRODUCTION TO PROGRAMMING

1.1 PROGRAMMING OVERVIEW

The OfficeServ 7100 system arrives from the factory with default data. Connect it to
trunks, stations and power, turn the system on and it is fully operational. The only thing
left to do is customize the data to fit the customer's needs. This is called programming
the system.
MMC stands for Man Machine Code and each program is assigned a different three
digit code. These MMC codes are used to view, create or change customer data.
Programming is simply deciding what needs to be done and knowing which MMC is
used to do it. For example, use MMC 601 to create a station group. System speed dial
numbers are entered in MMC 705 and soft keys are assigned to individual keysets
using MMC 722.
System programming may be done from any two line display keyset. The first thing you
must do is open system programming. As a security measure, a passcode must be
known to do this.
•
iDCS KEYSETS
This diagram illustrates the keys on a
iDCS 28 BUTTON and a iDCS 18
BUTTON keyset that have special
functions during programming. When
required, these keys will be referred to
by the names described in the
diagram.
1.1.1