Samsung OfficeServ 7100 Technical Manual page 171

OfficeServ 7100
TECHNICAL MANUAL
MMC: 417
Not For Use In The United States.
DESCRIPTION:
Allows loss levels for digital trunks to be adjusted on a per trunk basis. There are
two adjustments available in this MMC. "TX" is the transmit level adjustment of the
trunk to the station. "RX" is the receive level adjustment of the station to the trunk.
Caution!! This MMC is not to correct low volume. To be used with the support of
STA Technical Support Department.
Note: This MMC does not work with US trunk cards changing values will not have
any effect.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Press TRANSFER 417
Display shows
2. Enter desired trunk number (e.g., 705)
via the dial pad
OR
Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor.
Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor.
3. Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
Home Page
PROGRAMMING
PART 2 APRIL 2007
TRK TMC GAIN
DISPLAY
[701] TRK GAIN
RX:+0.0 TX:+0.0
[705] TRK GAIN
RX:+0.0 TX:+0.0
[705] TRK GAIN
RX:+0.0 TX:+0.0
[705] TRK GAIN
RX:+0.0 TX:+0.0
[701] TRK GAIN
RX:+0.0 TX:-2.5
Table of Contents