Samsung OfficeServ 7100 Technical Manual page 507

OfficeServ 7100
TECHNICAL MANUAL
MMC: 868
DESCRIPTION:
This MMC assigns a remote station number to the three or four digit number in the
switch dial plan. The telephone numbers are entered in MMC 724 Remote Station
(RS) section. The outbound telephone digits are entered in MMC 868 in the DGT:
section. These digits will be processed through MMC 710 for routing. These services
are great for Cell Numbers and Remote switch numbers.
Up to 999 entries can be entered. (0001-2000).
1.
DGT: Digits to be received. Up to 12 digits may be entered.
2.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION
1. Press TRANSFER 868.
Display shows.
2. Enter valid index number, e.g. 0005,
via dial keypad
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
3. Enter digits to be translated (e.g. 8501)
via dial keypad and press RIGHT
soft key to move cursor.
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to advance to next
REMOTE STATION TRANSLATION
Home Page
PROGRAMMING
PART 2 JANUARY 2009
DISPLAY
0001:TEL#[NONE]
DGT:
0005:TEL#[NONE]
DGT:
0005:TEL#[NONE]
DGT:8501
0005:TEL#[NONE]
DGT:8501
Table of Contents