Samsung OfficeServ 7100 Technical Manual page 446

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

DESCRIPTION:

This MMC is used for SIP Trunking applications where the SIP source requires

registration on a "per-user" basis. This means that each station on the OfficeServ

7100 system that accesses SIP trunks (inbound or outbond calls) will require an

unique user ID and password.

NOTE: In order to use this MMC, you must set "GW SERVICE"=ENABLE in

If your SIP server does not authenticate on a per-user basis, then this MMC is not

Up to 100 (01~100) registrations can be entered.

1. Move cursor (using right soft key) to the registration number and use the

volume up and down button to scroll through up to 100 users.

2. Press the right soft key to move the cursor to the "usernum" field and use

volume up/down buttons to toggle between "usernum" and "password".

Enter the "usernum" (usually DID assigned to the station) and the

corresponding password for each registration.

Table of Contents

PART 2 APRIL 2007