Samsung OfficeServ 7100 Technical Manual page 322

OfficeServ 7100
TECHNICAL MANUAL
MMC: 725
DESCRIPTION:
Allows the system administrator to select the information printed on the SMDR report.
The following options may be selected to print on SMDR:
00. PAGE HEADER
01. LINE PER PAGE
02. INCOMING CALL
03. OUTGOING CALL
04. AUTHORIZE CODE
05. SMDR START TIME
06. IN/OUT GROUP
07. DND CALL
08. WAKE-UP CALL
09. DIRECTORY NAME
This option determines whether a page header will print at
the top of each page. This would normally be turned off if
SMDR is being sent to a Call Accounting machine.
This option selects the length of each page to determine
when to print the SMDR header. The number of lines may
be in the range 01–99.
This option determines whether incoming calls will print
on SMDR.
This option determines whether outgoing calls will print
on SMDR.
This option determines whether authorization codes will
print on SMDR.
This option determines whether valid calls will include the
minimum call time in total call duration.
This option allows a message, IN GROUP or OUT GROUP,
to be printed in the digits dialed column each time a
station enters or leaves a group.
This option allows a message, IN DND or OUT DND, to be
printed in the digits dialed column each time a station
enters or leaves DND.
This option determines whether stations receiving an
alarm reminder call will print on SMDR.
This option allows the system administrator to enter a 16
character name which will appear on the SMDR header.
Home Page
PROGRAMMING
PART 2 APRIL 2007
SMDR OPTIONS
Table of Contents