Samsung OfficeServ 7100 Technical Manual page 21

OfficeServ 7100
TECHNICAL MANUAL
MMC: 102
DESCRIPTION:
Allows the system administrator to program the call forward destinations for other
station users. This MMC also allows call forward to be set after the destination has
been entered.
The OfficeServ 7100 system allows five types of call forwarding: FORWARD ALL,
FORWARD NO ANSWER, FORWARD BUSY, FORWARD FOLLOW ME and
FORWARD DND. There is an additional option, FORWARD BUSY/NO ANSWER, that
allows both of these options to be activated at the same time, provided that
destinations have been entered for both. Destinations for forward types 1, 2, 3 and 5
can be internal or external numbers.
0 = FORWARD CANCEL
1 = ALL CALL
2 = BUSY
0 = FORWARD CANCEL
1 = FORWARD ALL
2 = BUSY
3 = NO ANSWER
4 = BUSY/NO ANSWER
5 = FWD DND
CALL FORWARD
3 = NO ANSWER
4 = BUSY/NO
ANSWER
5 = FORWARD DND
This option will cancel any call forwarding set in MMC
102. It will not remove the programmed destination
and will not override any preset forward settings in
MMC 316.
This option, when set, will forward all calls to the
programmed destination.
destination is a station then that station can call the
forwarded station to put calls through.
This option, when set, will forward calls to the
programmed destination when the forwarded keyset
is busy.
This option, when set, will forward calls to the
programmed destination if the forwarded station does
not answer a call before the forward no answer timer in
MMC 502 expires.
This option will activate both the BUSY option and the
NO ANSWER option at the same time.
This option will forward all calls to the programmed
destination whenever the forwarded station goes into
DND.
Table of Contents
Home Page
PROGRAMMING
PART 2 APRIL 2007
If the programmed