Samsung OfficeServ 7100 Technical Manual page 497

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

DESCRIPTION:

This MMC is used to set various system wide options. The list below describes each

option's purpose.

AUTO UPDATE TIME

SYSTEM SPEED BIN

IDLE WHEN ENBLOCK

2 LINE ENBLOCK

SPNET OVERLAP

[Applies to v.4.30 or Higher]

NOT FOR USE IN THE USA

This option determines the maximum number

of system speed dial numbers. When set to the

default, MAX 500, the system will have a

maximum of 500 system speed dial bins

numbered 500 to 999. When set to MAX 950

the system will have a maximum of 950 system

speed dial bins numbered 050 to 999. Station

speed dial bins will be 000 to 049.

NOTE: Personal speed dial numbers change

from 2 to 3 digits when MAX 950 is selected.

This option determines the idle status for 2 line

ITP keysets that are dialling in ENBLOCK

mode. When enabled ITP-5121D and ITP-

5107S keysets that are dialling when an

incoming call is received will have dialling

cancelled to present the ringing call. When

disabled incoming calls will not disrupt dialling.

Note: This option has no effect if 2LINE

ENBLOCK below is set to DISABLE.

When this option is enabled the ITP-5121D

and ITP-5107S keysets must press the SEND

button after dialling to place a call. This

operates like a cell phone. When disabled

digits are sent as dialled with no need to press

NOT FOR USE IN THE USA

PART 2 MAY 2009

SYSTEM OPTION

Table of Contents