Samsung OfficeServ 7100 Technical Manual page 253

OfficeServ 7100
TECHNICAL MANUAL
MMC: 701
DESCRIPTION:
This MMC is used to configure options for each class of service. Classes of Service
determine whether a particular station is able to access a feature or not. When a
feature has been restricted the user will hear error tone and see, if using a keyset
with an LCD, a display saying "limited class". There are 30 classes of service
available.
This MMC is divided into 5 categories: TOLL LEVEL, USABLE FEATURES, CALL
STN GROUP, CALL TRK GROUP, and CALL BIVMS STN.
TOLL LEVEL
USABLE FEATURES
CALL STN GROUP
CALL TRK GROUP
CALL BIVMS STN
ASSIGN COS CONTENTS
Set the toll level for this Class of Service. The default
is A for all Classes except 30, which defaults to H.
Toll restriction levels can be configured in MMC 702
and MMC 703.
Usable Features is a submenu that allows you to
grant or deny access to specific features. The list of
features can be found in Table A. Setting a feature to
YES will allow this Class of Service to use the feature,
a setting of NO will deny access.
Determine which station groups, if any, this Class of
Service is allowed to dial. By default all station groups
are set to YES.
Determine which trunk groups, if any, this Class of
Service is allowed to dial.
NOTE: Trunk groups that are denied cannot be
dialed directly or accessed through the use of Least
Cost Routing (LCR)
Determine which voicemail ports, if any, this Class of
Service is allowed to dial.
NOTE: This setting only affects BI-VMS ports that
belong to a Samsung Voicemail. Other types of BI-
VMS ports are unaffected.
Table of Contents
Home Page
PROGRAMMING
PART 2 MAY 2009