Samsung OfficeServ 7100 Technical Manual page 642

OfficeServ 7100
TECHNICAL MANUAL
Field Name
Announce hold time
OVERHEAD PAGE SCREEN:
Field Name
Use Remote hold
Remote hold dial
Page zone
Page access dial
Instructions
Repeat instructions
Hold for page prompt
Announce page
prompt
Description
attempts
Set whether or not the caller will hear their estimated
time in queue on the first attempt and / or subsequent
attempts
Description
Set if callers can be held remotely at the subscriber's station
The dial string to use to place the caller on remote hold
The page zone to use when doing an overhead page
The dial string to use to initiate the page
The digits to announce on the overhead page to let the
subscriber pick up the call. By default this is feature code "10"
and the trunk number.
The amount of times to repeat the instructions over the paging
system
Prompt to let a caller know they will be placed on hold while
the subscriber is paged
Prompt to announce the caller over the paging system
7.3.50
Table of Contents
Home Page
PROGRAMMING
PART 7 APRIL 2007