Samsung OfficeServ 7100 Technical Manual page 485

OfficeServ 7100
TECHNICAL MANUAL
MMC: 856
DESCRIPTION:
This MMC lists the date, time and entry location of the last 8 times that technician
programming was accessed. This will allow a technician to determine if there was
unauthorised access to system programming and where this access occurred. The
information stored in this log will consist of 2 elements, the date and time it occurred
at and the access location.
There are 4 types of access location information as described below:
NNNN This would be the extension number of a keyset that had accessed
programming directly.
LAN This would indicate that programming was accessed by OfficeServ™
Web Management via the LAN connection.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Press TRANSFER 856.
Display shows.
2. Enter index number (e.g., 3)
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
3. Press TRANSFER to exit
OR
Press SPEAKER to store and advance to next
MMC.
TECH PROGRAMMING LOGS
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Home Page
PROGRAMMING
PART 2 APRIL 2007
DISPLAY
(1) 10/30 01:24
207:10/30 01:25
Table of Contents