Samsung OfficeServ 7100 Technical Manual page 347

OfficeServ 7100
TECHNICAL MANUAL
STN GROUP:
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 741.
Display shows the first station port.
2. Press UP or DOWN to select station type or
station group
OR
Press RIGHT soft key to select a station
2. Dial station number
OR
Press UP or DOWN to scroll the number and
press RIGHT soft key to select block type
3. Press UP or DOWN to scroll block type
OR
Press RIGHT soft key to select group
4. Dial subscriber group number
OR
Press UP or DOWN to scroll group number
and press RIGHT soft key to select another
station
5. Press TRANSFER button to store and exit
OR
Press SPEAKER button to store and
advance to next MMC.
MMC: 741
This section allows you to set the block structure for all
Station Groups in the OfficeServ 7100. By default all groups
are set to EXT.
Home Page
PROGRAMMING
PART 2 MAY 2009
DISPLAY
DLI/SLI :2001
MAKE:BOTH GRP:01
DLI/SLI :2001
MAKE:BOTH GRP:01
DLI/SLI :2001
MAKE:BOTH GRP:01
DLI/SLI :2001
MAKE:EXT GRP:01
DLI/SLI :2001
MAKE:BOTH GRP:01
Table of Contents