Samsung OfficeServ 7100 Technical Manual page 148

OfficeServ 7100
TECHNICAL MANUAL
MMC: 401
DESCRIPTION:
Used to select the mode of the C.O. line. If the PBX mode is chosen, this allows PBX
access codes to be recognized, thus allowing more complete toll restriction (call
barring). This mode is assigned on a per-trunk basis.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 401
Display shows
2. Dial trunk number (e.g., 704)
OR
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
OR
Press ANS/RLS to select ALL.
3. Dial 1 for PBX or 0 for C.O.
OR
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
DEFAULT DATA: ALL TRUNKS C.O. LINE
RELATED ITEMS: NONE
Home Page
PROGRAMMING
PART 2 APRIL 2007
C.O./PBX LINE
DISPLAY
[701] PBX LINE
CO LINE
[704] PBX LINE
CO LINE
[ALL] PBX LINE
?
[704] PBX LINE
PBX LINE
Table of Contents