Samsung OfficeServ 7100 Technical Manual page 367

OfficeServ 7100
TECHNICAL MANUAL
MMC: 764
DESCRIPTION:
This is the program to enable the DISA incoming call without entering the DISA
password according to the CID number of the incoming call to the DISA trunk line.
It is available to designate 500 CID numbers, and if the DISA call is received to the
CID number corresponding to the entered CID number, it is available to make a call
without entering the password althought MMC 210 DISA PASSWORD is designated
as ON.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Press TRANSFER 764.
Display shows.
2. Enter the table number ([001]-[500])
Otherwise, select the table number by
using the VOLUME button. Move the cursor
by pressing the RIGHT soft key.
3. Enter the CID number within maximum of 16
digits and move the cursor by pressing the
RIGHT soft key.
4. Press TRANSFER to exit
OR
Press the SPEAKER key to exit and advance to
the next MMC.
DEFAULT DATA: NONE
RELATED ITEMS: MMC 210 CUSTOMER ON/OFF PER TENANT
MMC 410 ASSIGN DISA TRUNK
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Home Page
PROGRAMMING
PART 2 JANUARY 2009
DISA PASSWORD
DISPLAY
DISA PASS [001]
CLI:
DISA PASS [001]
CLI:
DISA PASS [001]
CLI:1234
Table of Contents