Samsung OfficeServ 7100 Technical Manual page 386

OfficeServ 7100
TECHNICAL MANUAL
MMC: 815
DESCRIPTION:
Provides a means to copy the customer database to the media card (MCDB). This
enables the on board database to be copied to the media card (MCDB) and also
allows the media database to be copied to the on board memory (SYSDB). A daily
save can be programmed to automatically save the on board data base memory to
the media card. This ensures that an up to date database is always available in the
case of a catastrophic failure. A daily save time of 00:00 means there is no save
performed. It is recommended to CLEAR the media card before the system
database (SYSDB) is copied to it. When the system database is copied to the media
card there is no interruption in service. If the media card is copied to the system
database (SYSDB) the system will reset to accept the new data.
Section 1.3 SYSTEM MEMORY MANAGEMENT for details.
Note: The MP10 uses DRAM memory for the system database (SYSDB).
The MP10a uses NAND flash memory for the system database (SYSDB).
DATABASE IDENTIFICATION
MCDB
SYSDB (DRAM)
S:mm/dd/yy hh:mm
DAILY SAVE hh:mm
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 815.
Display shows.
2. Press RIGHT soft key to move cursor.
CUSTOMER DATABASE COPY
OfficeServ 7100 media card database
OfficeServ 7100 MCP On-Board database
Indicates the time the database was saved to the media
card or the time the On-Board Database was last saved.
The time the On-Board Database will be saved to the media
card
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Home Page
PROGRAMMING
PART 2 JANUARY 2009
IMPORTANT: See
DISPLAY
CUST DBASE:MCDB
S:03/12/99 00:00
CUST DBASE:MCDB
S:03/12/99 00:00
Table of Contents