Samsung OfficeServ 7100 Technical Manual page 395

OfficeServ 7100
TECHNICAL MANUAL
MMC: 821
DESCRIPTION:
Provides a means of programming a PRI for normal C.O. operation or networking.
This option will only prompt for the first trunk in the span, but will affect the entire
span.
OPTIONS
NORMAL
Q-SIGNALLING
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SPEAKER Used to store data and advance to next MMC
HOLD Used to delete an entry
ACTION
1. Press TRANSFER 821.
Display shows.
2. Press UP or DOWN key to select
PRI.
3. Press RIGHT soft key to move cursor.
4. Press UP or DOWN key to make selection
Press RIGHT soft key to make change
and return to step 1.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: ALL SPANS NORMAL OPERATION
RELATED ITEMS: MMC 823 NETWORK COS
MMC 824 NETWORK DIALING
MMC 825 NETWORK OPTIONS
DESCRIPTION
For CO operation.
For Q-Sig/PRI networking.
Home Page
PROGRAMMING
PART 2 APRIL 2007
Q-SIG TRUNK
DISPLAY
[701] Q-SIG TRK
NORMAL
[725] Q-SIG TRK
NORMAL
[725] Q-SIG TRK
NORMAL
[725] Q-SIG TRK
Q-SIGNALLING
Table of Contents