Samsung OfficeServ 7100 Technical Manual page 437

OfficeServ 7100
TECHNICAL MANUAL
• GEN NO RESP:
• REQ RETRY:
EXT: SIP Extension Configuration
• IP-UMS PORT:
• EXPIRE TIME:
• SIGNAL PORT:
TRK: SIP Trunk Configuration
• iBG EXPIRE:
• INCOM MODE:
• PEER CLIPTB:
• RCV CLI FWD:
• DEFAULT ISP:
ISP1-4: SIP Carrier Options
• SIP Server:
MMC: 837
Before sending Cancel for General Request, the User Agent
shall wait for this amount of time. The range is 0~99900.
After sending General Request, the User Agent shall wait for
the Final Response for this amount of time. The range is
0~99900.
UDP Socket port number to communicate with the
OfficeServ IP-UMS.
Expiration time period for SIP stations registration. When
OfficeServ gives a valid response for SIP stations REGISTER
request, OfficeServ informs the SIP station that the
registration will be valid for the time period specified in this
field. Unit is a second.
UDP Socket port number which is open for SIP station.
Expiration time period for Ubigate's registration. Ubigate
acts as a SIP station.
This option selects how incoming calls are routed: FOLLOW
DID TRANS (MMC 714), FOLLOW TRUNK RING (MMC 406),
FOLLOW INCOM DGT (MMC 406)
This option determines the CLI table in MMC 321 to use for
SIP Peering
This option, when enabled, passes incoming CLI when
transferring SIP calls to other destinations
For future use. If OfficeServ can interoperate with multiple
ITSPs at the same time, this field used to select the default
one.
This option enables or disables the SIP profile.
Table of Contents
Home Page
PROGRAMMING
PART 2 MAY 2009