Samsung OfficeServ 7100 Technical Manual page 564

OfficeServ 7100
TECHNICAL MANUAL
Field Name
Prompt
Invalid condition prompt
Request password prompt
Maximum caller entry digits
Wait for first entry digits
Wait for subsequent digits
Repeat prompt if NO ENTRY
Retry if INVALID condition
Append to KEY register
Store KEY value in
Description
Enter up to 6 prompts that will be spoken in sequence.
These prompts will be played to the caller when the Menu
first begins processing the call. They are typically used to
speak company greetings and available menu options.
The prompt to play if the caller makes an invalid selection
The prompt to play if the Administration digit is entered
The number of digits to wait for from the caller. This field
only applies if 'Take INPUT from' is set to ENTRY
The amount of time to wait for the first digit of the caller's
selection to be entered
The amount of time to wait between digits
The number of times to repeat the Menu prompts if no
entry is made
The number of retries allowed if the caller makes an
invalid selection
If using the validated entry storage (below), this option
decides whether to append or replace the existing key.
Appending to the existing key is useful in scenarios where
multiple Menu blocks are chained together.
The input value can optionally be stored in a key for use
in later menus. With this method the input value is
validated, meaning that it is only stored if a matching
menu entry exists for the input value.
5.3.42
Table of Contents
Home Page
PROGRAMMING
PART 5 APRIL 2007