Samsung OfficeServ 7100 Technical Manual page 453

OfficeServ 7100
TECHNICAL MANUAL
Option
ITP TX GAIN/HSET
ITP RX GAIN/HSET
ITP TX GAIN/MIC
ITP RX GAIN/SPKR
ITP VERS
UPGRADE
("PHONE TFTP IP"
and "PHONE
VERSION" must be
set).
MGI ALIVE PERIOD
DATA CARD IPC
ITP RING VOLUME
ITP MAX TX LIMIT
WIP DSP PARA
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER Used to store data and advance to next MMC
ACTION
1. Press TRANSFER 841.
Display shows the first available option.
MMC: 841
Description
Sets IP-based phone Handset TX gain value of each level.
Sets IP-based phone Handset RX gain value of each level.
Sets IP-based phone MIC gain value of each level.
Sets IP-based phone SPKR gain value of each level.
Sets IP-based phone software upgrade option with the
system. Used for automatic software upgrades.
0 TYPE: Sets IP-based phone software upgrade type..
a) MMC COMMAND: IP-based phone software upgraded
manually in MMC 840.
b) PHONE CON: IP-based phone software upgraded
automatically at phone connection.
c) AUTO TIME: IP-based phone software upgraded
automatically at set time.
1 START TIME: IP-based phone software automatic upgrade
start time.
2 INTERVAL: IP-based phone software automatic upgrade
interval time.
Time interval between heart beat check between MGI and
MCP .
(NOT USED IN US)
LEVEL 1-8
(NOT USED IN US)
M-FRAME: This value determines the transmission interval
time of VoIP packets generated by the WIP handset. The
range is 10~40 ms. Applies only to WIP to WIP calls (when
both WIPs are on the same subnet).
ECHOCNCL: Enable echo cancellation on WIP handsets
Used to scroll through options
Used to enter selections
Move cursor left and right
Home Page
PROGRAMMING
PART 2 MAY 2009
Default
-
-
-
-
-
MMC
COMMAND
0000.
(Disable)
10 seconds.
-
YES
1
YES
40 MSEC
ENABLE
DISPLAY
ITP RESIGTRATION
ENABLE /ITP PSWD
Table of Contents