Samsung OfficeServ 7100 Technical Manual page 400

OfficeServ 7100
TECHNICAL MANUAL
29 – DNDO CAPABL: DNDO Capability Level (0 ~ 3) The subscription parameter
"DNDO Capability Level" (DNDOCL) shall be provided. The DNDOCL has a value in
the range 1 (lowest capability) to 3 (highest capability). At least one of the DNDOCL
values shall be offered.
30 – DNDO PROTEC: If DNDO Protection Level (1 ~ 3) is implemented then the
subscription parameter "DND protection level" (DNDPL) shall be provided. The
DNDPL has a value in the range 0 to 3 where 0 means no protection against DNDO
and 3 means total protection against DNDO. The values 0 and 3 shall be offered.
The values 1 and 2 may, as an implementation option, be offered.
31 - PAGE.: This feature allows station users in one node to initiate network pages
to other page zones to different nodes in the network.
32 - PATH REPL.: Path Replacement (PR) is invoked by an ANF-PR user for an
established call, allowing that call's connection through the network to be replaced
by a new connection. The direction of the new connection may be decided by the
PR user. If the new connection is required to satisfy certain criteria, PR should be
used in conjunction with other supplementary services.
33 - PATH RETEN: Path Retention -the retention of the network connection
between the Originating and Terminating nodes so that a supplementary service
(such as DNDO) can be invoked without establishing a new connection.
DEFAULT DATA: 01: CALLER OFFER: Y
03: NOT USED
04: CC SIG CONN:
05: CC SVC RETN:
06: CCBS:
07: CCNR:
08: CFB:
09: CFNR:
10: CFU:
11: CI:
12: CI CAPABIL:
14: CI PROTECT:
15: NOT USED
16: NOT USED
17: NOT USED
18: NOT USED
19: NOT USED
20: NOT USED
21: NOT USED
MMC: 823
Y
Y
N
N
Y
Y
Y
N
2
2
Table of Contents
Home Page
PROGRAMMING
PART 2 APRIL 2007