Samsung OfficeServ 7100 Technical Manual page 627

OfficeServ 7100
TECHNICAL MANUAL
Field Name
Min Recorded Length
Dialtone Timesize
CODEC
Minimum DTMF duration
DTMF cutout period
Outbound DTMF duration
Outbound DTMF gap length
Description
Minimum time, in milliseconds, of a prompt, greeting, or
voicemail message recording
Determines the amount of dial tone to allow at the end of
a voicemail message
Set the voice CODEC to be used by the system
Set the smallest interval that can be considered a valid
DTMF digit
Time, in milliseconds, to pause playback if DTMF is
detected
Sets the duration of DTMF digits sent by the system
Set the time between outbound DTMF digits
7.3.35
Table of Contents
Home Page
PROGRAMMING
PART 7 APRIL 2007