Samsung OfficeServ 7100 Technical Manual page 394

OfficeServ 7100
TECHNICAL MANUAL
ACTION
1. Press TRANSFER 820.
Display shows.
2. Press UP or DOWN to select system.
3. Press RIGHT soft key twice to move cursor to
entry field. Enter SYS LINK ID for each
networked system.
4. Press RIGHT soft key twice to move cursor to
option field.
Press UP to select SIGNAL G/W networked
system.
5. Press RIGHT soft key to move cursor to entry
field. Enter MCP IP address for each IP
networked system.
6. Press TRANSFER button to store and exit
OR
Press SPEAKER button to store and advance to
next MMC.
DEFAULT DATA: NOT USED
RELATED ITEMS: MMC 830: ETHERNET PARAMETERS
MMC: 820
DISPLAY
SELF: LINK ID
SYS05: LINK ID
SYS05: LINK ID
006
SYS05:SIGNAL G/W
SYS05:
192.168.0.XXX
Table of Contents
Home Page
PROGRAMMING
PART 2 MAY 2009