Samsung OfficeServ 7100 Technical Manual page 226

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

NOTES: Calls to a group do not follow the call forwarding instructions of any

stations in the group.

I. GRP AUTOANS: OFF When this option is set to ON, intercom calls to the group

will Auto Answer/Voice Announce if the station is programmed for Auto

Answer/Voice Announce in MMC 103. CO calls will follow the AUTO ANS CO

setting in MMC 110 for a group member in addition to the group members setting

FEATURE KEYS

0 SEQUENTIAL

1 DISTRIBUTED

2 UNCONDITIONAL All the stations listed in the group will ring. Busy stations will

PROGRAM KEYS

(Normal, VM/AA, UCD, VMUCD, BI-VMS GRP, MSG GROUP, SO

STN GRP, VMS UCD GRP, AA ONLY VM)

Ring mode (Sequential, Distributed or Unconditional)

Overflow time (000 - 250 secs.)

Group transfer time (000 - 250 secs.)

Group or station number (e.g. group 502, station 221, 244)

Group members (e.g., station 202, 225, 231)

Hunt time (000 – 250 secs)

The first idle station listed in the group will ring. If the first is

busy, the next idle station will ring.

The first call will ring the first station listed in the group. The

next call will ring the next station listed in the group.

receive off-hook ring. MAXIMUM 32 STATIONS RINGING.

Used to scroll through options

Used to enter selections

Move cursor left and right

Used to store data and advance to next MMC

Used to clear previous entry

Table of Contents

PART 2 APRIL 2007