Download Print this page

Samsung OfficeServ 7100 Technical Manual page 499

Hide thumbs Also See for OfficeServ 7100:

Advertisement

OfficeServ 7100
TECHNICAL MANUAL
TRUNK~MOBEX CLIP
VOIP RTP OPTION
MMC: 861
TONE SOURCE
This option sets the source for the AUTH
TONE specified above. The default setting of
TONE will play the system hold tone. Any valid
music source may also be used.
BLF BY CLI
This option determines the BLF status of
MOBEX ports. When set to ON the system will
immediately flag a MOBEX port as busy when
a call with the associated Caller ID is received.
When set to OFF the port will not be set as
busy until the user has successfully logged in.
ANSWER TIME
This option sets the amount of time for the
Executive MOBEX number to ring before
answering. Setting this option to 00 will cause
the port to answer immediately. Valid settings
are from 00 to 30 seconds.
TO ISDN
This setting determines what outbound CLI
number should be used when making calls to
MOBEX ports. The default setting, RECEIVED,
will send the CLI number received from the
incoming caller and retransmit it as the
outgoing call ID. MASTER will send the CLI
number from MMC 321 assigned to the
MOBEX port's Master Station. MOBEX will
send the CLI number of the MOBEX port from
MMC 321.
TO SIP
This setting is for future use and can be
ignored.
DTMF
This option sets the DTMF delivery method to
use for MGI channels. The default setting is
RFC2833, which means that DTMF will be sent
in-band
according
Table of Contents
Home Page
PROGRAMMING
PART 2 MAY 2009
to
the
RFC2833

Advertisement

loading