Samsung OfficeServ 7100 Technical Manual page 658

OfficeServ 7100
TECHNICAL MANUAL
GENERAL SCREEN:
Field Name
VMS Group
Label Name
Number
Extension
MClass
Language
Announce only mailbox
Send broadcast MSG
allowed
Use LIFO message
ordering
New message beep(s)
Description
The tenant group this mailbox is a part of
The name of this mailbox
The mailbox number for this block
The extension number for this mailbox, if any
The MClass block that governs this mailbox
The language to use when a subscriber logs in to this mailbox
Sets whether or not this mailbox can accept voicemail
messages
Allows this mailbox to send broadcast messages. Broadcast
messages are sent to every subscriber in the system.
Determines if messages are played back in chronological (First
In, First Out or FIFO) or reverse chronological (Last In, First Out
or LIFO) order
When enabled, the voicemail will beep before requesting the
subscriber password to allow the user to quickly know from a
remote location if they have new messages or not. One beep
signifies one message, two beeps signifies 2 or more
messages.
7.3.66
Table of Contents
Home Page
PROGRAMMING
PART 7 APRIL 2007