Samsung OfficeServ 7100 Technical Manual page 157

OfficeServ 7100
TECHNICAL MANUAL
MMC: 406
DESCRIPTION:
Enables ringing to a specific station or to a group of stations when incoming calls
are received. This MMC controls ring plan destinations for ring down trunks. If the
ring plan destinations are not input the default ring plan is ring plan 1. Station group
500 is default in Ring Plan 1. (In a networked system this MMC can be used to
assign ringing to any station or station group in the entire network).
DEVICE
3 Digit Station
3 Digit Station group
4 Digit Station
4 Digit Station group
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Press TRANSFER 406
Display shows
2. Use UP or DOWN to scroll through trunk
numbers and press the RIGHT soft key to
move the cursor OR press ANS/RLS for ALL
OR
3. Dial trunk number (e.g., 704).
4. Dial ring plan number or press the RIGHT
softkey to move to the next step.
TRUNK RING ASSIGNMENT
DEFAULT DN
201–2xx, 301–3xx
2001–20xx
5000–5xxx
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL (trunks only)
Home Page
PART 2 APRIL 2007
500–5xx
DISPLAY
[701] TRK RING
1:500 2:500
[All] TRK RING
1:500 2:500
[704] TRK RING
1:500 2:500
[704] TRK RING
1:500 2:500
Table of Contents
PROGRAMMING