Samsung OfficeServ 7100 Technical Manual page 370

OfficeServ 7100
TECHNICAL MANUAL
MMC: 801
DESCRIPTION:
Used to change the passcode which allows access to MMC 800 Enable Technician
Program from its current value.
NOTE: The passcode is four characters long. Each character can be digits 0-9. The
current or old passcode is required for this MMC.
PROGRAM KEYS
KEYPAD
SPEAKER
ACTION
1. Press TRANSFER 801.
2. Enter new passcode.
3. Enter new passcode again.
4. If passcode is correct, press RIGHT soft key
to continue and enter desired MMC.
If passcode is incorrect.
System returns to step 2.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to advance to MMC.
DEFAULT DATA: DEFAULT PASSCODE = 4321
RELATED ITEMS: MMC 800 ENABLE TECHNICIAN PROGRAM
CHANGE TECHNICIAN PASSCODE
Used to enter passcodes
Save data and advance to next MMC
Home Page
PROGRAMMING
PART 2 APRIL 2007
DISPLAY
TECH. PASSCODE
NEW CODE:_
TECH. PASSCODE
NEW CODE: ∗∗∗∗
TECH. PASSCODE
: : ∗∗∗∗
VERIFY
TECH. PASSCODE
VERIFY :SUCCESS
TECH. PASSCODE
PASSCODE :FAILURE
TECH. PASSCODE
NEW CODE: : ∗∗∗∗
Table of Contents