Samsung OfficeServ 7100 Technical Manual page 487

OfficeServ 7100
TECHNICAL MANUAL
MMC: 857
DESCRIPTION:
This MMC is used to configure Virtual Cabinet slots. Virtual Cabinets contain devices
that are not physical such as SIP trunks, Virtual Single Line Phones, or MOBEX
stations. Because these devices are not tied to a physical port they are considered to
be virtual devices and as such reside in a Virtual Cabinet. The OfficeServ 7100 has 6
Virtual Cabinets numbered 2 through 7. Each Virtual Cabinet has 3 slots, numbered 1
through 3, with 8 ports per slot.
MMC 857 configuration directly affects the appearance in the numbering plan
(MMC 724) for these devices.
The available Virtual Cabinet assignments are shown below, with defaults highlighted in
green:
Virtual
Slot 1
Cabinet
SLT
DGP
WIRED ITP
2
WLAN ITP
SIP STN
MOBEX STN
WLAN ITP
WIRED ITP
SIP STN
4
SPNET TRK
SIP TRK
MOBEX STN
MOBEX STN
6
DGP
[Applies to v.4.30 or Higher]
Slot 2 Slot 3
DGP DGP
SLT SLT
WIRED ITP WIRED ITP
WLAN ITP WLAN ITP
SIP STN SIP STN
MOBEX STN MOBEX STN
NONE GCONF STN
GCONF STN SPNET TRK
SPNET TRK SIP TRK
SIP TRK MOBEX STN
MOBEX STN
MOBEX STN MOBEX STN
DGP DGP
Home Page
VIRTUAL CABINETS
Virtual
Slot 1
Cabinets
WIRED ITP WIRED ITP
SLT WLAN ITP
DGP
3
WLAN ITP SPNET TRK
SIP STN
MOBEX STN MOBEX STN
SPNET TRK
GCONF STN GCONF STN
SIP TRK SPNET TRK
5
H323 TRK
MOBEX STN MOBEX STN
7
DGP
Table of Contents
PROGRAMMING
PART 2 MAY 2009
Slot 2 Slot 3
WIRED ITP
WLAN ITP
SIP STN SIP STN
SPNET TRK
SIP TRK SIP TRK
MOBEX STN
SIP TRK H323 TRK
GCONF STN
SPNET TRK
H323 TRK SIP TRK
MOBEX STN
DGP DGP