Samsung OfficeServ 7100 Technical Manual page 88

OfficeServ 7100
TECHNICAL MANUAL
62 SMDR AUT2 ACC:OFF
64 IPNW REAL RB:OFF
66 TRK AUTO MOH:OFF
67 TRSF VT KEY:ON
68 PAIR NO RING:OFF
69 DISA NO ACT:OFF
70 ICM AUTO HOLD:OFF
73 DTMF to SO: OFF
74 STN HOLD PICK: OFF
75 AREA DELETE:OFF
76 ELCR DIAL TONE: OFF
83 3.1K W/O HLC:OFF
84 AOC CALLCOST:OFF
85 CHKIN RESTRC:OFF
86 CHECK-IN FAC:OFF
MMC: 210
When using authorization codes over 4 digits (maximum
10) set this option to ON and the authorization code will
print in the Account Code field of SMDR. When set to OFF
only the first four digits of any authorization code will
appear in the AUTH field of SMDR.
When set to OFF the Ring Back tone on network calls will
be generated from the originating MCP card. When set to
ON, the distant MCP card provides both Ring Back tone on
network calls.
Turn this option ON to have the system immediately answer
an incoming call and play the AA (Auto Answer) source set
in MMC 408.
Turn this ON to make the TRANSFER key act like a VT key.
It will buffer digits dialed then send to Voice Mail after
hanging up. Example: While on a call press TRANSFER,
dial the Voice Mail Group number, then mailbox number,
then hang up. OFF = normal TRANSFER key operation.
When set to OFF a call to a busy station paired with another
will ring at the paired station. Turn this ON and a call to a
busy station paired with another will not ring at the paired
station.
Turn this ON to disconnect a caller to the DISA line when
they take no action before the DISA NO ACTION TIME in
MMC 501.
Set this option to ON to have intercom calls follow AUTO
HOLD ON/OFF option in MMC 110.
NOT USED IN THE USA
If ON intercom calls that are on HOLD can be picked up by
other stations.
NOT USED IN THE USA.
This option provides a second dial tone different from the
extension dial tone when using E-LCR
When ON, an incoming call is dialed when the type of ISDN
incoming call is 3.1K AUDIO type without HLC.
NOT USED IN THE OFFICESERV 7100.
NOT USED IN THE OFFICESERV 7100.
NOT USED IN THE OFFICESERV 7100.
Table of Contents
Home Page
PROGRAMMING
PART 2 MAY 2009