NEC Univerge SV8100 Features And Specifications Manual page 86

Issue 5.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
22-05-01 Incoming Trunk Ring Group
Assignment
2 - 60
Description/Comments
Assign the incoming trunk type for
each trunk.
Assign extensions (up to 32) to
Ring Groups. Calls ring extensions
according to Ring Group
programming. There are 100
available ring groups.
Assign trunks to incoming Ring
Groups. Use this program to
assign Normal Ring Trunks
(Program 22-02) to Incoming Ring
Groups (Program 22-04).
UNIVERGE SV8100
Assigned Data
1
Incoming Type for Day/
Night Mode (1~8):
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
Answer Key
Level
2 3


