Gearshift Linkage Inspection; Gearshift Shaft Oil Seal Removal And Installation - Suzuki SFV650 Service Manual

• Install the gearshift shaft assembly (8) and washer (9)
as shown.
NOTE
Pinch the gearshift arm stopper (10) with
return spring ends "F".
8
• Install the washer (11) and snap ring (12).
Special tool
: 09900–06107 (Snap ring pliers)
11
• After installing the gearshift lever, check the gearshift
lever height. Refer to "Gearshift Lever Height
Inspection and Adjustment (Page 5B-13)".
9
I944H1520060-01
"F"
10
"F"
I944H1520061-01
12
I944H1520062-01
Manual Transmission:

Gearshift Linkage Inspection

Refer to "Gearshift Shaft / Gearshift Cam Plate Removal
and Installation (Page 5B-14)".
Gearshift Shaft
Check the gearshift shaft for bend or wear.
Check the return spring for damage or fatigue.
If any defects are found, replace the defective part(-s).
Gearshift Shaft Oil Seal
Inspect the gearshift shaft oil seal lip for damage or
wear. If any defect is found, replace the oil seal with a
new one.
Gearshift Shaft Oil Seal Removal and
Installation
Removal
1) Remove the gearshift shaft. Refer to "Gearshift Shaft
/ Gearshift Cam Plate Removal and Installation
(Page 5B-14)".
2) Remove the gearshift shaft oil seal (1).
5B-17
B944H15206015
I944H1520063-01
I944H1520064-01
B944H15206016
1
I944H1520065-01