Resident System Program; Reverse Voice Over - NEC UNIVERGE SV8100 Configuration Manual

Issue 2.00
Redial Function
Users can press Redial to cycle through the last 10 outside numbers dialed. Pressing
redials the number displayed. Users can also press Redial and dial a System Speed
#
Dial bin number to access System Speed Dial.
Remote (System) Upgrade
With PC Programming, the UNIVERGE SV8100 can be remotely upgraded to a
newer version of main system software. When a new version of main system software
is released, a firmware package file is provided. Using the PCPro application, a
technician can remotely upgrade the firmware on the CD-CP00. The upgrade can be
applied immediately, or at a scheduled date and time. Remote Upgrade is supported
only via a LAN connection. A modem or serial connection is NOT supported for
Remote Upgrade.
Repeat Redial
If a multiline terminal user places a trunk call that is busy or unanswered, they can
have Repeat Redial try it again later on. The user does not continually have to try the
number again – hoping it goes through. Repeat Redial automatically retries it until the
called party answers (the number of retries is based on system programming).

Resident System Program

When power is applied to the system, the hardware configuration is scanned and
Resident System Program default values are assigned including terminal types [e.g.,
PGD(2)-U10 ADP or DSS Console]. This enables immediate operation, even before
the system is programmed to accommodate the individual site requirements.

Reverse Voice Over

While on a call, Reverse Voice Over lets a busy multiline terminal user make a private
Intercom call to an idle co-worker. The idle co-worker can be at a multiline terminal or
single line telephone. The busy user presses a programmed Reverse Voice Over key
to make a private call to a specified co-worker. The initial caller cannot hear the
Reverse Voice Over conversation. The private Intercom call continues until the
Reverse Voice Over caller presses the key again. The initial call can be an outside
call or an Intercom call.
Reverse Voice Over could help a salesman, for example, when placing a call to an
important client. The salesman can talk with the client and give special instructions to
a secretary – without interrupting the initial call.
2 - 36
Wait 10 seconds.
Dial the OCC security code and desired number. The system dials the DTMF
digits after the conversion.
UNIVERGE SV8100
Features