System Logging Commands; Log - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Command Line Reference

System Logging Commands

9-30

System Logging Commands

These commands are used to configure system logging on the access point.
Command Function

log

Displays all log entries in access point memory.
[no] logging
Adds a syslog server host IP address and assign a port number
<syslog_host> that will receive logging messages.
[syslog_port]
show debug Displays the debugging results.
show logging Displays the state of logging.

log

This command displays all the entries in the event log on the device. This
command is functionally the same as the show logging command.
Syntax
log
Default Setting
N/A
Command Mode
Manager Exec
Mode Page
MC 9-30
GC 9-31
MC 9-32
MC 9-32