Cli: Configuring Client/Station Deauthentication - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Wireless Security Configuration
Configuring MAC Address Authentication
N o t e
7-52
Clearing the MAC Lockout list. The following example shows how to
remove all MAC addresses from the current MAC Lockout list.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# lockout-mac clear all
2 MAC addresses removed from lockout list
ProCurve Access Point 530(config)# show lockout-mac
No MAC addresses in lockout list.
ProCurve Access Point 530(config)#

CLI: Configuring Client/Station Deauthentication

The client/station deauthentication command deauth-mac deauthenticates a
specific device from the access point. All sessions that match the MAC address
are immediately disconnected from all WLANs on all radios.
Unlike MAC Lockout, a deauthenticated client/station is not blocked from re-
authenticating.
CLI Commands Used in This Section
Command Syntax
deauth-mac <mac_address>
Deauthenticating a device from the access point. The following exam-
ple shows how to force a client device to deauthenticate from the access point.
ProCurve Access Point 530# deauth-mac 00:d0:59:c8:62:dd
ProCurve Access Point 530#
CLI Reference Page
9-78