Show Buttons - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

ssl - Enable remote HTTPS (secure) access to the device. The no
•
version of the command disables remote HTTPS access.
Default Setting
Enabled
Command Mode
Global Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# web-management ssl
ProCurve Access Point 530(config)#

show buttons

This command displays the status of the push button capabilities.
Syntax

show buttons

Default Setting
N/A
Command Mode
Manager Exec
General Configuration Context
Example
This example displays the status of the push buttons on the access point.
ProCurve Access Point 530# show buttons
Custom Reset
Factory Reset
Password Reset
System Reset
ProCurve Access Point 530#
System Management Commands
Enabled
Enabled
Enabled
Enabled
Command Line Reference
9-25