Wireless Distribution System (Wds); Description (Wds) - HP ProCurve 530 NA (J8986A) Management And Configuration Manual

Wireless Distribution System (WDS)

The WDS commands supported by the access point are listed below.
Command Function
description Establishes the WDS link description
disable
Disables the WDS link.
enable Establishes the WDS link.
radio-used
Sets the radio that will be used by this WDS link.
remote-mac Sets the mac address for the remote connection to the
access point.
show wds
Displays WDS link information.
wds-ssid <ssid> Establishes the SSID name for this WDS link.
wep-key Sets wds security key for the wireless connection.
wep-key-ascii Sets wds security to ascii format.
wep-key-length Sets wds security key length.
wpa-pre-shared-key
Sets wds pre-shared key.

description (wds)

This command creates a human-readable string description of this WDS.
Syntax
description <string>
string - Description of the WDS.
•
Default Setting
N/A
Command Mode
WDS Interface Configuration
Command Line Reference
Wireless Distribution System (WDS)
Mode Page
IC-WDS 9-158
IC-WDS 9-158
IC-WDS 9-158
IC-WDS 9-159
IC-WDS 9-160
IC-WDS 9-160
IC-WDS 9-159
IC-WDS 9-161
IC-WDS 9-162
IC-WDS 9-162
IC-WDS 9-163
9-157