snmp-server trap
This command enables and disables selected SNMP traps on the access point.
Syntax
[no] snmp-server trap <trap>
trap - One of the SNMP traps supported by the AP-530:
•
adHocNetworkDetected
apDetectionUpdate
apInterfaceUpdate
buttonUpdate
clientAssociation
clientAuthentication
clientDeAuthenticate
clientReAssociation
clientRequestFailure
dot1XAuthFailure
dot1XAuthNotInitiated
dot1XAuthSuccess
localMacAuthFailure
localMacAuthSuccess
mgmtAccessUpdate
mgmtVlanIdUpdate
possibleNeighborAp
radioAntennaUpdate
radiusAcctUpdate
radiusServerFailover
remoteMacAddrAuthFail
remoteMacAddrAuthSucc
sysConfigFileTransfer
systemDown
systemFWUpgradeStatus
systemUp
vlanUntaggedUpdate
Default Setting
none
Command Mode
Global Configuration
Command Line Reference
Network Management Application Commands
9-43